Thrust Ball Bearing
A722-802
(NSN) National Stock Number
3110-01-088-2023
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
00019
Schedule B Code
8482105008
Summary
0.1230 inches minimum and 0.1250 inches maximum overall height, 0.3085 inches minimum and 0.3105 inches maximum overall outside diameter, 0.1270 inches nominal bore smallest diameter, 0.1290 inches nominal largest bore diameter, ground surface finish, machined retainer fabrication method
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | CT |
Identification
An antifriction bearing having a ball rolling element, designed to resist axial thrust, or to support an axial load. Excludes:bearing,ball,pivot.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00019 | A044A0 | - | 1 |
Specifications
Overall Height
0.1230 inches minimum and 0.1250 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Outside Diameter
0.3085 inches minimum and 0.3105 inches maximum
Details
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.Bore Smallest Diameter
0.1270 inches nominal
Details
The length of a straight line which passes through the center of the smallest diameter of a bore,and terminates at the circumference.Largest Bore Diameter
0.1290 inches nominal
Details
None.Surface Finish
ground
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Retainer Fabrication Method
machined
Details
The means used in manufacturing the retainer.Alignment Type
rigid
Details
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.Thrust Directional Capability Designation
single
Details
A designation of the directional operating capability of the item.Standard Tolerance Designation
abec no.5
Details
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.Special Features
ring and balls c56.0 to c64.0 rockwell hardness
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 440c ball
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 440c inner ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 440c outer ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 630 retainer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi 440c assn std single material response ball
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
aisi 440c assn std single material response inner ring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
aisi 440c assn std single material response outer ring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
ms 5643 assn std single material response retainer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
grooved race surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
73030-599242-3 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 599242-3 | 73030 | 1 | - | 7 | 2 | - | CT |
| 599242-3 | 99167 | 5 | - | 3 | 2 | - | ZZ |
| 599242-3 | 99207 | 5 | - | 3 | 2 | - | ZZ |
| 599242-3 | 40920 | 5 | - | 3 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MPB CORP DBA MPB CORP DIV TIMKEN SUPER PRECISION
CAGE: 40920
KEENE
, NH
, 03431-4320
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3110-01-088-2023
What is the NIIN of the NSN 3110-01-088-2023?
The National Item Identification Number (NIIN) of the NSN 3110-01-088-2023 is 01-088-2023
When the NSN 3110-01-088-2023 was assigned to the Federal Catalog?
It was assigned 44 years ago, on Tue, Jan 8, 1980
Does the NSN 3110-01-088-2023 contain any precious metals?
Type/content is unknown
Does the NSN 3110-01-088-2023 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products