Annular Ball Bearing
SFR133SSW3VLC011
(NSN) National Stock Number
3110-00-033-3437
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
00014
Schedule B Code
8482105028
Summary
0.0937 inches nominal overall width, 0.0937 inches nominal bore diameter, 0.2340 inches nominal flange outside diameter, 0.0310 inches nominal flange width, 0.1875 inches nominal outer ring outside diameter, c calibration designator
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00014 | A044A0 | - | 1 |
Specifications
Overall Width
0.0937 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Bore Diameter
0.0937 inches nominal
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Flange Outside Diameter
0.2340 inches nominal
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0310 inches nominal
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Outer Ring Outside Diameter
0.1875 inches nominal
Details
None.Calibration Designator
c
Details
The alpha or alpha-numeric symbol representing a specific calibration within a tolerance limit.Surface Finish
ground
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Retainer Fabrication Method
stamped
Details
The means used in manufacturing the retainer.Shield Quantity
2
Details
The number of shields included on the item.Load Direction
radial
Details
The direction of load with respect to the shaft axis.Bore Shape
straight
Details
The physical configuration of the bore.Internal Fit-Up Designation
tight
Details
The designation specifying the type of fit as recognized by industrial and governmental agencies.Internal Clearance
0.0002 inches minimum radial and 0.0004 inches maximum radial
Details
The clearance between the bearing rings and the rolling elements.Standard Tolerance Designation
abec no. 7p
Details
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.Special Features
retainer loosely clinched
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Lubrication Material
oil
Details
The chemical compound or mechanical mixture properties with which the item is lubricated.Lubrication Material Document And Classification
mil-l-6085 mil spec single material response
Details
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.Material
steel corrosion resisting overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Special Test Features
torque tested to meet more critical specification values for very low torque levels
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Style Designator
non-loading groove, non-separable
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION
CAGE: 70854
DANBURY
, CT
, 06810-7505
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3110-00-033-3437
What is the NIIN of the NSN 3110-00-033-3437?
The National Item Identification Number (NIIN) of the NSN 3110-00-033-3437 is 00-033-3437
When the NSN 3110-00-033-3437 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Nov 1, 1972
Does the NSN 3110-00-033-3437 contain any precious metals?
Type/content is unknown
Does the NSN 3110-00-033-3437 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.