Part Number 218770 Annular Ball Bearing

Product Features

Flange on extended outer ring of bearing on the loading groove side, flange slotted 0.1240 in. Wide on vertical center line, 4 holes 0.0938 in. Diameter drilled on od of outer ring O.1400/0.1300 in. In from flange, 30 degrees above and below horizontal center line, inner ring counter bored to 0.8070/0.8060 in. Diameter on loading groove side of bearing, opposite side of inner ring chamfered O.0780 in. By 45 deg, bearing heat stabilized to operate at 350 deg, mark outlet on flange face, notch in inner ring bore, 15 degrees from vertical center line, 0.0460 in. Wide by 0.0060 in. Deep