Blind Rivet
PLT110-10-24
(NSN) National Stock Number
5320-00-062-3168
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
7318230000
Summary
2.408 inches nominal fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.310 inches minimum and 0.311 inches maximum shank diameter, threaded self-plugging shank w/sleeve shank style, 0.577 inches minimum and 0.635 inches maximum head major diameter, threaded mandrel expansion device
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SE |
Identification
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00864 | A040A0 | - | 1 |
Specifications
Fastener Length
2.408 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Shank Diameter
0.310 inches minimum and 0.311 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
threaded self-plugging shank w/sleeve
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Head Major Diameter
0.577 inches minimum and 0.635 inches maximum
Details
None.Expansion Device
threaded mandrel
Details
The device by which the item is expanded and set.Lubrication
grease film or wax or cetyl alcohol
Details
A substance designed to provide a reduction of friction between the two surfaces in contact.Grip Length
1.531 inches nominal
Details
A measurement of the longest dimension of the grip,in distinction from width.Minimum Tensile Strength
180000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
39.0 rockwell c minimum bolt and 43.0 rockwell c maximum bolt
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Hardness Rating
39.0 rockwell c minimum nut and 43.0 rockwell c maximum nut
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Countersink Angle
99.0 degrees minimum and 101.0 degrees maximum
Details
The included angle of the countersink.Material
steel comp 303 sleeve or steel comp 304 sleeve
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a582 assn std 1st material response sleeve or ams 5639 assn std all material responses sleeve or ams 5641 assn std all material responses sleeve or qq-s-763 fed spec 2nd material response sleeve
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-6758 mil spec 1st material response bolt or mil-s-5626 mil spec 2nd material response bolt or mil-s-6049 mil spec 3rd material response bolt
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-6758 mil spec 1st material response nut or mil-s-5626 mil spec 2nd material response nut or mil-s-6049 mil spec 3rd material response nut
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium bolt and chromate bolt
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
cadmium nut and chromate nut
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate sleeve and cadmium sleeve
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec 1st treatment response sleeve and qq-p-416 ty 1 cl 3 fed spec 2nd treatment response sleeve
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-416 ty 2 cl 2 fed spec single treatment response bolt
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-416 ty2 cl 2 fed spec single treatment response nut
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| PLT110-10-24 | 98524 | 4 | - | 5 | 2 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54760 | - | U | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HOWMET GLOBAL FASTENING SYSTEMS INC DIV TORRANCE OPERATIONS
CAGE: 92215
TORRANCE
, CA
, 90505-5103
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5320-00-062-3168
What is the NIIN of the NSN 5320-00-062-3168?
The National Item Identification Number (NIIN) of the NSN 5320-00-062-3168 is 00-062-3168
When the NSN 5320-00-062-3168 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sun, Nov 19, 1972
Does the NSN 5320-00-062-3168 contain any precious metals?
Type/content is unknown
Does the NSN 5320-00-062-3168 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products