Part Number 2532308 Plate Spacer

Product Features

Ithere are two holes on the end that are drilled 0.203 inch-with minus 0.02 inch and plus of 0.05 inch through and the bolt hole slare located 0.250 inches from end and 0.187 inches from side also 1.750 inches plus and minus 0.005 inches from center to center of bolt holes the corner on the sides are 0.062 inches by 45 degrees plus and minus 5 degrees there are two screw holes located 0.625 inches from ends to center of screw holes, the screw holes center is located 0.454 inches from sides and 1.000 inches between screw hole center the holes are drilled 0.250-20UNC-3B through 0.203 and csk 90 degrees plus 10 degrees to a diameter of 0.328 inches with variation of plus of 0.015 inches and a minus 0.005 inches