Sleeve Nut
5508018
+2.2000 to 2.2400 inches thread pitch diameters, right-hand thread direction, 3.540 inches minimum and 3.550 inches maximum flange diameter, 0.115 inches minimum and 0.125 inches maximum flange thickness, sleeve nut style, 3.057 inches minimum and 3.060 inches maximum nut diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | BF |
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 29735 | A021A0 | 1 | 1 |
Details
The minimum and maximum pitch diameter limits of a straight screw thread.Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Details
None.Details
A measurement of the longest dimension of the nut,in distinction from width.Details
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.Details
Indicates the type and number of holes provided.Details
The geometric configuration of the item when viewed in cross section.Details
The geometric configuration of the item when viewed in cross section.Details
The geometric configuration of the item when viewed in cross section.Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Details
A designation that is used for the purpose of general identification of the thread.Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 55190 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
What is the NIIN of the NSN 5310-00-550-8018?
When the NSN 5310-00-550-8018 was assigned to the Federal Catalog?
Does the NSN 5310-00-550-8018 contain any precious metals?
Does the NSN 5310-00-550-8018 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.