Part Number 217307PC90A Aligning Washer

Steel, 4.187 in. Od, 2.375 in. Id bore, 0.500 in. H, 4.500 in. Radius surface to a 0.3125 in. H on od, opposite side counterbored 2.605 in. To 3.812 in. Dia, 0.125 in. Deep, six 0.188 in. Diameter holes equally spaced on 3.250 in.Bolt dia, one 0.250 in. Diameter hole 30 degrees from 1.88 in. Hole fitted for PIN7/16 in. Lg.

88032

• Schedule B: 7318220000
• SITC: 69422
• End Use: Finished metal shapes
• NAICS: 332722
• USDA: 1

Washers other than lock washers, iron or steel