Headless Shoulder Pin
6866149
(NSN) National Stock Number
5315-00-168-7338
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
16749
Schedule B Code
-
Summary
Chamfered first end style, 0.115 inches minimum and 0.120 inches maximum shank length, 0.235 inches minimum and 0.240 inches maximum shoulder diameter, 0.1835 inches minimum and 0.1840 inches maximum shank diameter, 0.260 inches minimum and 0.280 inches maximum overall length, 0.010 inches minimum and 0.015 inches maximum first end taper length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16749 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Shank Length
0.115 inches minimum and 0.120 inches maximum
Details
A measurement of the longest dimension of the shank,in distinction from width.Shoulder Diameter
0.235 inches minimum and 0.240 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shank Diameter
0.1835 inches minimum and 0.1840 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Overall Length
0.260 inches minimum and 0.280 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.First End Taper Length
0.010 inches minimum and 0.015 inches maximum
Details
None.Second End Relationship With First End
identical
Details
Indicates whether or not the second end is identical to the first end.Hardness Rating
30.0 rockwell c minimum overall and 34.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.First End Location
both ends
Details
Indicates the location of the first end.First End Taper Angle
45.0 degrees nominal
Details
None.Criticality Code Justification
aaze
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Surface Finish
32.0 microinches both ends
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Second Shank Length
0.115 inches minimum and 0.120 inches maximum
Details
None.Material
steel comp 410 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5613 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
shoulder
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81343-ams2640 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5315-00-168-7338
What is the NIIN of the NSN 5315-00-168-7338?
The National Item Identification Number (NIIN) of the NSN 5315-00-168-7338 is 00-168-7338
When the NSN 5315-00-168-7338 was assigned to the Federal Catalog?
It was assigned 54 years ago, on Wed, Nov 4, 1970
Does the NSN 5315-00-168-7338 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-168-7338 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.