square

0.025 inches minimum and 0.029 inches maximum

0.075 inches minimum and 0.087 inches maximum

0.032 inches minimum and 0.062 inches maximum

0.312 inches nominal

0.420 inches minimum and 0.424 inches maximum

w/s: engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); chilled water a/c systems; sonar rubber domes (srds); engine, aircraft tf33-p-3/5/9 (c/ec-135, b-52h); air compressors, high pressure; systems, jp-5 aviation fuels; aircraft, c-2a (reprocured); engine, aircraft, tf-33-p-7 (c-141a/b); aircraft, (ac-130h, mc-130h, ec-130e, hc-130)

scarf-butt retainer

25.0 degrees minimum and 35.0 degrees maximum

plastic tetrafluoroethylene overall

sae-as8791 national spec single material response overall

Precious metal content is unknown

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

0013706