Sleeve Bearing
3120000733030
(NSN) National Stock Number
3120-00-073-3030
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13205
Schedule B Code
8482997090
Summary
0.1880 inches nominal first hole diameter, 1.0580 inches minimum and 1.0600 inches maximum overall length, 1.7488 inches minimum and 1.7498 inches maximum body outside diameter, 0.9380 inches minimum and 0.9390 inches maximum body inside diameter, lubricating oil lubrication material, 1.9270 inches minimum and 1.9470 inches maximum flange outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 9 | - | - | 6 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | YP |
Identification
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Specifications
Hole Diameter
0.1880 inches nominal first
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Overall Length
1.0580 inches minimum and 1.0600 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
1.7488 inches minimum and 1.7498 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
0.9380 inches minimum and 0.9390 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Lubrication Material
lubricating oil
Details
The element compound or mixture with which the item is lubricated. please use mrc lbma as a replacement for canceled mrc.Flange Outside Diameter
1.9270 inches minimum and 1.9470 inches maximum
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0980 inches minimum and 0.1030 inches maximum
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Lubricant Accommodation Style
grooved circular
Details
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.Corner Shape
round left flange body corner
Details
The physical configuration of the corner.Corner Shape
square inside left corner
Details
The physical configuration of the corner.Corner Shape
square inside right corner
Details
The physical configuration of the corner.Corner Shape
square outside left corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Corner Shape
square outside right corner
Details
The physical configuration of the corner.Features Provided
casehardened
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Surface Finish
125.0 microinches right end surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches right end surface of left flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches outside diameter surface of flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
16.0 microinches inside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
32.0 microinches left end surface of body and flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
63.0 microinches outside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Antirotation/Lubrication Type And Quantity
1 hole
Details
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.Surface Groove Location And Quantity
1 external
Details
Indicates the location and number of grooves on the surface of the item.Material
aluminum alloy 2024 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
tin overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-t-10727 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| ERIA208 | R1120 | 6 | - | 5 | 2 | - | ZG |
| ERIA208 | 02978 | X | - | 5 | 2 | - | XX |
| 377034C | 1ML14 | 5 | - | 5 | 2 | - | CT |
| 377034C | 28265 | 5 | - | 5 | 9 | - | CT |
| 13206E0573 | 97403 | 1 | - | 3 | 2 | - | CT |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
CAGE: A00AM
NOUACEUR
, 27000
MOROCCO
View Products
FAQs
Frequently asked questions for NSN 3120-00-073-3030
What is the NIIN of the NSN 3120-00-073-3030?
The National Item Identification Number (NIIN) of the NSN 3120-00-073-3030 is 00-073-3030
When the NSN 3120-00-073-3030 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 3120-00-073-3030 contain any precious metals?
Does not contain precious metal
Does the NSN 3120-00-073-3030 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products