Duplex Ball Bearing
SSRI-1438ZZDB5RA7P58LG57
(NSN) National Stock Number
3110-01-180-9361
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
30213
Schedule B Code
8482105068
Summary
0.5604 inches minimum and 0.5624 inches maximum overall width, 0.3748 inches minimum and 0.3750 inches maximum bore diameter, 0.8748 inches minimum and 0.8750 inches maximum overall outside diameter, grease lubrication material, 5895-01-119-1601 recorder-reprocer,signal data end item identification, ground surface finish
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 30213 | A044A0 | - | 1 |
Specifications
Overall Width
0.5604 inches minimum and 0.5624 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Bore Diameter
0.3748 inches minimum and 0.3750 inches maximum
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Overall Outside Diameter
0.8748 inches minimum and 0.8750 inches maximum
Details
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.Lubrication Material
grease
Details
The element compound or mixture with which the item is lubricated. please use mrc lbma as a replacement for canceled mrc.End Item Identification
5895-01-119-1601 recorder-reprocer,signal data
Details
The national stock number or the identification information of the end equipment for which the item is a part.Surface Finish
ground
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Retainer Fabrication Method
stamped
Details
The means used in manufacturing the retainer.Shield Quantity
2
Details
The number of shields included on the item.Load Direction
radial
Details
The direction of load with respect to the shaft axis.Internal Clearance
0.0005 inches minimum radial and 0.0008 inches maximum radial
Details
The clearance between the bearing rings and the rolling elements.Standard Tolerance Designation
abec no. 7p
Details
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.Bearing Preload Rating
5.0 pounds nominal
Details
The amount of internal loading in a bearing which is independent of any external radial and/or axial load.Lubrication Material Document And Classification
mil-g-23827,a72832 mil spec single material response
Details
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.Material
steel comp 440c overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-b-23063,calss 3 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Reference Data And Literature
mil-b-23063 class 3 except qualification
Details
Literature and references available for information pertaining to the item.Style Designator
counterbored outer rings, non-separable, back to back mounting
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Type/Model Designation
rd-450/ash-33
Details
The alpha-numeric-alpha designation used to identify the type and/or model of the basic item.Specification/Standard Data
28009-16610107 manufacturers specification control
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 16610107-001 | 28009 | 2 | - | 7 | 2 | - | 9Z |
| SR6RHH7DB5PORM1/2LY167 | 40920 | 4 | - | 3 | 2 | - | 9Z |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| - | - | - | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | - | - | - |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION
CAGE: 50294
CHATSWORTH
, CA
, 91311-4323
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3110-01-180-9361
What is the NIIN of the NSN 3110-01-180-9361?
The National Item Identification Number (NIIN) of the NSN 3110-01-180-9361 is 01-180-9361
When the NSN 3110-01-180-9361 was assigned to the Federal Catalog?
It was assigned 40 years ago, on Tue, Jun 5, 1984
Does the NSN 3110-01-180-9361 contain any precious metals?
Type/content is unknown
Does the NSN 3110-01-180-9361 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products