Annular Ball Bearing
W308PPFS137
(NSN) National Stock Number
3110-00-005-5763
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
00014
Schedule B Code
8482105028
Summary
1.4375 inches nominal overall width, 40.00 millimeters nominal bore diameter, 90.00 millimeters nominal overall outside diameter, ground surface finish, pressed retainer fabrication method, 2 seal quantity
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | HX |
Identification
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00014 | A044A0 | - | 1 |
Specifications
Overall Width
1.4375 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Bore Diameter
40.00 millimeters nominal
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Overall Outside Diameter
90.00 millimeters nominal
Details
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.Surface Finish
ground
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Retainer Fabrication Method
pressed
Details
The means used in manufacturing the retainer.Seal Quantity
2
Details
The number of seals included on the item.Bearing Seal Type
contact
Details
Indicates the type of seal provided with the bearing.Load Direction
radial
Details
The direction of load with respect to the shaft axis.Bore Shape
straight
Details
The physical configuration of the bore.Internal Fit-Up Designation
standard
Details
The designation specifying the type of fit as recognized by industrial and governmental agencies.Standard Tolerance Designation
abec no.1
Details
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.Lubrication Material
grease
Details
The chemical compound or mechanical mixture properties with which the item is lubricated.Lubrication Material Document And Classification
mil-l-15719 mil spec single material response
Details
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.Material
steel ball
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
rubber synthetic seal
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel inner ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel outer ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel retainer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Style Designator
non-loading groove, non-separable cartridge type
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Reference Number Differentiating Characteristics
material must conform to ships parts control center special quality control provisions
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 3110-00-005-5763
What is the NIIN of the NSN 3110-00-005-5763?
The National Item Identification Number (NIIN) of the NSN 3110-00-005-5763 is 00-005-5763
When the NSN 3110-00-005-5763 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jun 16, 1972
Does the NSN 3110-00-005-5763 contain any precious metals?
Type/content is unknown
Does the NSN 3110-00-005-5763 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.