Plain Stud
10005333
(NSN) National Stock Number
5307-01-164-2374
Federal Supply Classification
5307 Studs
Item Name Code
15948
Schedule B Code
-
Summary
Right-hand nut thread thread direction, right-hand stud thread thread direction, 18.50 millimeters maximum stud thread and 20.75 millimeters maximum stud thread thread length, 18.50 millimeters minimum nut thread and 20.75 millimeters maximum nut thread thread length, 44.2 millimeters minimum and 45.8 millimeters maximum overall length, 10.0 millimeters nut thread nominal thread size
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also rod, threaded end and rod, continuous thread.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15948 | A051A0 | - | 1 |
Specifications
Thread Direction
right-hand nut thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand stud thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
18.50 millimeters maximum stud thread and 20.75 millimeters maximum stud thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Thread Length
18.50 millimeters minimum nut thread and 20.75 millimeters maximum nut thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Overall Length
44.2 millimeters minimum and 45.8 millimeters maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nominal Thread Size
10.0 millimeters nut thread
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
10.0 millimeters stud thread
Details
A designation that is used for the purpose of general identification of the thread.Thread Pitch In Millimeters
1.50 nut thread
Details
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.Thread Pitch In Millimeters
1.50 stud thread
Details
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.Thread Tolerance Class
6g external stud thread
Details
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.Thread Tolerance Class
6g external nut thread
Details
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.Material
steel
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
g-500-m(9.8),fscm 11862 mfr ref single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
phosphate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
gm 4435m code a,fscm 11862 mfr ref single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
m nut thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
m stud thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 24504213 | 7X677 | 5 | - | 3 | 2 | - | ZZ |
| 10005333 | 11862 | A | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5307-01-164-2374
What is the NIIN of the NSN 5307-01-164-2374?
The National Item Identification Number (NIIN) of the NSN 5307-01-164-2374 is 01-164-2374
When the NSN 5307-01-164-2374 was assigned to the Federal Catalog?
It was assigned 41 years ago, on Fri, Oct 14, 1983
Does the NSN 5307-01-164-2374 contain any precious metals?
Does not contain precious metal
Does the NSN 5307-01-164-2374 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products