Panel Screw Assembly
FT1500-10-5-8DL
(NSN) National Stock Number
5305-01-609-5621
Federal Supply Classification
5305 Screws
Item Name Code
33044
Schedule B Code
7318152000
Summary
Right-hand thread direction, 1.707 inches nominal fastener length, knurled no. 5 head style, 0.451 inches nominal head diameter, 0.520 inches nominal head height, slot internal drive style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| C | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 33044 | A003B0 | - | 1 |
Specifications
Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Fastener Length
1.707 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
knurled no. 5
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.451 inches nominal
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.520 inches nominal
Details
A measurement from the bottom to the top of the head,in distinction from depth.Internal Drive Style
slot
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.End Item Identification
1430014184396
Details
The national stock number or the identification information of the end equipment for which the item is a part.Material Accommodated Thickness
0.218 inches minimum and 0.279 inches maximum
Details
The thickness of the material to be accommodated.Part Name Assigned By Controlling Agency
captive screw assembly
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Special Features
screw 0.190-32 unf-3a;assembly of knob,screw,spring,flat washer,
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel corrosion resisting fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel corrosion resisting primary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel corrosion resisting secondary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel corrosion resisting spring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel corrosion resisting stand-off
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm-a-493 national std/spec single material response fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-5059 mil std single material response primary washer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-5059 mil std single material response secondary washer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-s-763 fed spec single material response stand-off
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-w-423 fed spec single material response spring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response fastener
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response stand-off
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-416,tyii,cl2 fed spec single treatment response secondary washer
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 11438307-131 | 18876 | C | - | 3 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 50600 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5305-01-609-5621
What is the NIIN of the NSN 5305-01-609-5621?
The National Item Identification Number (NIIN) of the NSN 5305-01-609-5621 is 01-609-5621
When the NSN 5305-01-609-5621 was assigned to the Federal Catalog?
It was assigned 12 years ago, on Fri, Jul 27, 2012
Does the NSN 5305-01-609-5621 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-01-609-5621 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5305-01-609-5621?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products