Hexagon Head Cap Screw
ISO 4017-M10X1.5X20-8.8
Right-hand thread direction, 17.0 millimeters minimum and 20.0 millimeters maximum thread length, 20.00 millimeters nominal fastener length, hexagon head style, 7.0 millimeters nominal head height, 17.0 millimeters nominal width between flats
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 18257 | A003B0 | - | 1 |
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Details
A measurement from the bottom to the top of the head,in distinction from depth.Details
None.Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Details
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.Details
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| M10-1.5-20 DIN9 33ST | D9182 | 6 | - | C | 1 | - | ZZ |
| DIN EN ISO 4017 | I9008 | E | - | 5 | 1 | - | ZZ |
| DIN933STM10X1-5X20 | 05824 | 6 | - | C | 1 | - | ZZ |
| M10-1-5-20 DIN 933 ST | 05824 | A | - | 5 | 9 | - | KZ |
| 11500928 | 24617 | 9 | - | C | 1 | - | AZ |
| DIN933 M10X1.5X20-8.8 | 21969 | 5 | - | 5 | 9 | - | KZ |
| 423-520 | 72741 | 4 | - | E | 8 | - | KZ |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
What is the NIIN of the NSN 5305-01-145-1196?
When the NSN 5305-01-145-1196 was assigned to the Federal Catalog?
Does the NSN 5305-01-145-1196 contain any precious metals?
Does the NSN 5305-01-145-1196 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.