Panel Screw Assembly
FLW-7900-10-A-4
(NSN) National Stock Number
5305-01-081-9477
Federal Supply Classification
5305 Screws
Item Name Code
33044
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.250 inches nominal thread length, 0.806 inches minimum and 0.846 inches maximum fastener length, fillister head style, 0.365 inches nominal head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 33044 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.250 inches nominal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.806 inches minimum and 0.846 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
fillister
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.365 inches nominal
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.105 inches nominal
Details
A measurement from the bottom to the top of the head,in distinction from depth.Material Accommodated Thickness
0.031 inches minimum and 0.050 inches maximum
Details
The thickness of the material to be accommodated.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
80000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Material
iron alloy 660 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams5735 assn std single material response fastener or ams5736 assn std single material response fastener or ams5737 assn std single material response fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-5059 mil spec single material response primary washer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-225/8 fed spec single material response stand-off
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-w-423 fs cond b fed spec single material response spring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize stand-off
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate fastener
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate primary washer
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate secondary washer
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate spring
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625 ty 1 cl 1 mil spec single treatment response stand-off
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response fastener
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response primary washer
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response secondary washer
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response spring
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| FLW-7900-10-A-4 | 97928 | A | - | 5 | 9 | - | KZ |
| 583R583H32 | 48306 | 5 | - | 3 | 2 | - | ZZ |
| 583R583H32 | 97942 | 2 | - | 3 | 9 | - | SB |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION
CAGE: 0HDW7
TUCSON
, AZ
, 85714-3410
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-01-081-9477
What is the NIIN of the NSN 5305-01-081-9477?
The National Item Identification Number (NIIN) of the NSN 5305-01-081-9477 is 01-081-9477
When the NSN 5305-01-081-9477 was assigned to the Federal Catalog?
It was assigned 45 years ago, on Thu, Aug 23, 1979
Does the NSN 5305-01-081-9477 contain any precious metals?
Type/content is unknown
Does the NSN 5305-01-081-9477 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products