Assembled Washer Screw
TH8675-1032-13
(NSN) National Stock Number
5305-00-514-8294
Federal Supply Classification
5305 Screws
Item Name Code
06660
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.687 inches nominal thread length, 0.781 inches minimum and 0.817 inches maximum fastener length, flat countersunk head style, 0.390 inches nominal head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | KE |
Identification
A screw, (as modified) to which has been assembled one or more nonremovable washer(s).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06660 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.687 inches nominal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.781 inches minimum and 0.817 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flat countersunk
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.390 inches nominal
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Washer Quantity
1
Details
The number of washers included on the item.Internal Drive Style
high-torque
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Countersink Angle
100.0 degrees nominal
Details
The included angle of the countersink.Primary Washer Outside Diameter
0.640 inches minimum and 0.660 inches maximum
Details
None.Primary Washer Style
spring tension
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.Primary Washer Material Thickness
0.015 inches minimum and 0.021 inches maximum
Details
None.Material
steel comp 1050 primary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 8740 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6322 assn std single material response fastener or mil-s-6049 mil spec single material response fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
sae assn std single material response primary washer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium fastener
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
cadmium primary washer
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,type 2,class 3 fed spec single treatment response fastener
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-416,type 2,class 3 fed spec single treatment response primary washer
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5305-00-514-8294
What is the NIIN of the NSN 5305-00-514-8294?
The National Item Identification Number (NIIN) of the NSN 5305-00-514-8294 is 00-514-8294
When the NSN 5305-00-514-8294 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Sat, Aug 3, 1974
Does the NSN 5305-00-514-8294 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-514-8294 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.