Externally Relieved Body Screw

ST810659-18

ST810659-18
(NSN) National Stock Number
5305-00-412-9753
Federal Supply Classification
5305 Screws
Item Name Code
01852
Schedule B Code
7318152000
Summary

2a thread class, right-hand thread direction, 0.202 inches minimum and 0.212 inches maximum thread length, 0.672 inches minimum and 0.687 inches maximum fastener length, knurled no. 1 head style, 0.307 inches minimum and 0.317 inches maximum head diameter

DAC HCC DMIL RNCC
1 - - 7
RNVC SADC MSDS RNAAC
2 - - SE
Identification

An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.

INC FIIG Concept Condition
01852 A003B0 - 1
Specifications
Thread Class
2a
Details A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
Thread Direction
right-hand
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Thread Length
0.202 inches minimum and 0.212 inches maximum
Details A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
Fastener Length
0.672 inches minimum and 0.687 inches maximum
Details The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
Head Style
knurled no. 1
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
Head Diameter
0.307 inches minimum and 0.317 inches maximum
Details The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
Head Height
0.296 inches minimum and 0.328 inches maximum
Details A measurement from the bottom to the top of the head,in distinction from depth.
First Diameter From Head
0.115 inches minimum and 0.125 inches maximum
Details None.
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.372 inches minimum and 0.392 inches maximum
Details None.
Internal Drive Style
slot
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
Nominal Thread Diameter
0.164 inches
Details The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
Thread Quantity Per Inch
32
Details The number of threads on the item per linear inch measured on a line parallel to the thread axis.
Externally Relieved Body Diameter Quantity
1
Details The number of externally relieved diameters on the body,adjacent to the head.
Special Features
point style no. 6,0.078 in. min,0.120 in. max lg 85 to 95 deg chamfer angle,0.104 in. min,0.120 in. max dia
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Material
steel comp 303 overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
astm a582 assn std single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
passivate overall
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response overall
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Thread Series Designator
unc
Details A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
6387635-3 D9182 6 - C 1 - ZZ
6105SS0832 1YGB8 5 - C 1 - ZZ
6105SS0832-7 1YGB8 5 - C 1 - ZZ
6105SS0832-7 5W748 5 - 3 2 - ZZ
6105-SS-0832 1FJ15 5 - 5 9 - KZ
6105SS0832 06540 2 - 5 9 - KZ
6105SS0832-7 06540 5 - 5 9 - SE
03P246094 98738 A - 5 9 - KZ
SM546961-01 80063 2 - 5 9 - ZZ
SMB546961-01 80063 2 - 3 2 - KZ
10554729-2 19200 1 - 5 9 - BF
ST850659-18 80249 5 - C 1 - ZZ
3450714-13 93346 5 - 5 9 - ZZ
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
48950 - W -
RVC WCC TCC SHC
- 713 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
CAGE: 80249
GREENLAWN , NY , 11740-1609
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-00-412-9753
What is the NIIN of the NSN 5305-00-412-9753?
The National Item Identification Number (NIIN) of the NSN 5305-00-412-9753 is 00-412-9753
When the NSN 5305-00-412-9753 was assigned to the Federal Catalog?
It was assigned 54 years ago, on Wed, May 6, 1970
Does the NSN 5305-00-412-9753 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-412-9753 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA