Setscrew
101582-1
(NSN) National Stock Number
5305-00-185-9651
Federal Supply Classification
5305 Screws
Item Name Code
06672
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.290 inches minimum and 0.320 inches maximum thread length, 1.180 inches minimum and 1.198 inches maximum fastener length, hexagon head style, 0.240 inches minimum and 0.270 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TU |
Identification
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06672 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.290 inches minimum and 0.320 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
1.180 inches minimum and 1.198 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.240 inches minimum and 0.270 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.290 inches minimum and 0.330 inches maximum
Details
None.Hole Diameter
0.060 inches nominal
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Point Length
0.860 inches minimum and 0.908 inches maximum
Details
A measurement of the longest dimension of the point,in distinction from width.Point Diameter
0.155 inches minimum and 0.156 inches maximum
Details
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.Point Style
flat
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.Internal Drive Style
w/o internal drive
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Hole Quantity
1
Details
The number of holes provided.Hole Type
drilled
Details
Indicates the type of hole(s) provided in the item.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Hole Configuration Style
hexagon flats
Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Point Chamfer Angle
35.0 degrees minimum
Details
None. replaced by mrc csyt with isac 0368.Material
steel comp 410 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-s-763 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 101582-1 | 55820 | 1 | - | 5 | 9 | - | SE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5305-00-185-9651
What is the NIIN of the NSN 5305-00-185-9651?
The National Item Identification Number (NIIN) of the NSN 5305-00-185-9651 is 00-185-9651
When the NSN 5305-00-185-9651 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Wed, Feb 24, 1971
Does the NSN 5305-00-185-9651 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-185-9651 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products