Close Tolerance Screw

3MA334CFA20

3MA334CFA20
(NSN) National Stock Number
5305-00-001-8184
Federal Supply Classification
5305 Screws
Item Name Code
29294
Schedule B Code
7318152000
Summary

3a thread class, right-hand thread direction, 0.443 inches minimum and 0.510 inches maximum thread length, 2.015 inches minimum and 2.062 inches maximum fastener length, flat countersunk head style, 0.497 inches minimum and 0.507 inches maximum head diameter

DAC HCC DMIL RNCC
A - - 5
RNVC SADC MSDS RNAAC
9 - - KZ
Identification

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

INC FIIG Concept Condition
29294 A003B0 - 1
Specifications
Thread Class
3a
Details A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
Thread Direction
right-hand
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Thread Length
0.443 inches minimum and 0.510 inches maximum
Details A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
Fastener Length
2.015 inches minimum and 2.062 inches maximum
Details The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
Head Style
flat countersunk
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
Head Diameter
0.497 inches minimum and 0.507 inches maximum
Details The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
Grip Diameter
0.2483 inches minimum and 0.2492 inches maximum
Details The length of a straight line which passes through the center of the grip,and terminates at the circumference.
Internal Drive Style
cross recess type 1
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
Nominal Thread Diameter
0.250 inches
Details The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
Grip Length
1.552 inches minimum and 1.572 inches maximum
Details A measurement of the longest dimension of the grip,in distinction from width.
Thread Quantity Per Inch
28
Details The number of threads on the item per linear inch measured on a line parallel to the thread axis.
Minimum Tensile Strength
160000 pounds per square inch
Details The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
Hardness Rating
36.0 rockwell c minimum overall and 40.0 rockwell c maximum overall
Details A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
Countersink Angle
99.0 degrees minimum and 100.0 degrees maximum
Details The included angle of the countersink.
Material
steel comp 4140 overall or steel comp e4340 overall or steel comp 6150 overall or steel comp 8735 overall or steel comp 8740 overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
mil-s-5626 mil spec 1st material response overall or mil-s-5000 mil spec 2nd material response overall or mil-s-8503 mil spec 3rd material response overall or mil-s-6098 mil spec 4th material response overall or mil-s-6049 mil spec 5th material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
cadmium overall and chromate overall
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment
paint grip
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment
paint head
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment Document And Classification
qq-p-416,ty 2 fed spec 1st treatment response overall
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Thread Series Designator
unf
Details A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
3MA334FA20 06950 5 - 5 2 - ZZ
3MA334FA20 06725 5 - 5 2 - ZZ
3MA334FA20 92215 5 - 5 2 - ZZ
3MA334FA20 06065 5 - 5 9 - ZZ
3MA334FA20 77545 5 - 5 2 - ZZ
3MA334FA20 76301 A - 3 2 - KZ
3MFR334CFA20 76301 1 - 5 9 - KE
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
48950 - W -
RVC WCC TCC SHC
- 713 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
THE BOEING COMPANY DIV DEFENSE
CAGE: 76301
SAINT LOUIS , MO , 63134-1939
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-00-001-8184
What is the NIIN of the NSN 5305-00-001-8184?
The National Item Identification Number (NIIN) of the NSN 5305-00-001-8184 is 00-001-8184
When the NSN 5305-00-001-8184 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Oct 4, 1972
Does the NSN 5305-00-001-8184 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-001-8184 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA