Blind Rivet
624-3104
(NSN) National Stock Number
5320-01-514-2933
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
7318230000
Summary
0.486 inches nominal fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.191 inches minimum and 0.201 inches maximum shank diameter, self-plugging high clinch shank shank style, 0.345 inches nominal head major diameter, serrated stem-type w expansion device
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | ZZ |
Identification
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00864 | A040A0 | - | 1 |
Specifications
Fastener Length
0.486 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Shank Diameter
0.191 inches minimum and 0.201 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
self-plugging high clinch shank
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Head Major Diameter
0.345 inches nominal
Details
None.Expansion Device
serrated stem-type w
Details
The device by which the item is expanded and set.End Item Identification
halvorsen loader
Details
The national stock number or the identification information of the end equipment for which the item is a part.Grip Length
0.125 inches minimum and 0.331 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Minimum Tensile Strength
950 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Shear Strength
1300 single pounds per square inch
Details
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.Countersink Angle
100.0 degrees nominal
Details
The included angle of the countersink.Part Name Assigned By Controlling Agency
rivet,solid
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Material
steel comp 304 stem or steel comp 305 stem
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 302 sleeve
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
passivate sleeve
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| SSC6-6SKL | 10054 | 5 | - | 3 | 2 | - | ZZ |
| MGL100-U6-6 | 9K475 | A | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54760 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
JOHN BEAN TECHNOLOGIES CORPORATION DBA JBT AEROTECH-MILITARY PROGRAMS DIV JBT AEROTECH
CAGE: 93408
ORLANDO
, FL
, 32809-5620
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5320-01-514-2933
What is the NIIN of the NSN 5320-01-514-2933?
The National Item Identification Number (NIIN) of the NSN 5320-01-514-2933 is 01-514-2933
When the NSN 5320-01-514-2933 was assigned to the Federal Catalog?
It was assigned 21 years ago, on Wed, Oct 22, 2003
Does the NSN 5320-01-514-2933 contain any precious metals?
Does not contain precious metal
Does the NSN 5320-01-514-2933 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products