Blind Rivet
F200-7FR
(NSN) National Stock Number
5320-00-060-5855
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
7318230000
Summary
0.526 inches minimum and 0.556 inches maximum fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.197 inches minimum and 0.199 inches maximum shank diameter, threaded self-plugging shank w/sleeve shank style, 0.378 inches minimum and 0.385 inches maximum head major diameter, serrated stem-type w expansion device
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
Identification
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00864 | A040A0 | - | 1 |
Specifications
Fastener Length
0.526 inches minimum and 0.556 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Shank Diameter
0.197 inches minimum and 0.199 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
threaded self-plugging shank w/sleeve
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Head Major Diameter
0.378 inches minimum and 0.385 inches maximum
Details
None.Expansion Device
serrated stem-type w
Details
The device by which the item is expanded and set.Lubrication
dry film or wax
Details
A substance designed to provide a reduction of friction between the two surfaces in contact.Grip Length
0.406 inches minimum and 0.469 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Hardness Rating
30.0 rockwell c minimum and 45.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Shear Strength
4530 double pounds per square inch
Details
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.Countersink Angle
99.0 degrees minimum and 101.0 degrees maximum
Details
The included angle of the countersink.Material
iron alloy 660 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5735 assn std single material response overall or ams 5737 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-f-14072,ty 2 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| FF200-7FR | 98524 | X | - | 5 | 9 | - | XX |
| BE6A7FR | 92215 | 5 | - | 5 | 2 | - | ZZ |
| F200-7FR | 92541 | 5 | - | 5 | 9 | - | KZ |
| FF200-7FR | 92541 | 5 | - | 3 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54760 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MONOGRAM AEROSPACE FASTENERS, INC DBA TRIMAS AEROSPACE DIV MONOGRAM AEROSPACE FASTENERS
CAGE: 98524
COMMERCE
, CA
, 90040-3103
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5320-00-060-5855
What is the NIIN of the NSN 5320-00-060-5855?
The National Item Identification Number (NIIN) of the NSN 5320-00-060-5855 is 00-060-5855
When the NSN 5320-00-060-5855 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5320-00-060-5855 contain any precious metals?
Type/content is unknown
Does the NSN 5320-00-060-5855 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products