Pin-Rivet

GB512F6-6

(NSN) National Stock Number

5320-00-034-5213

Federal Supply Classification

5320 Rivets

Item Name Code

67165

Schedule B Code

7318230000

Summary

3a thread class, right-hand thread direction, 0.395 inches minimum and 0.415 inches maximum fastener length, flush countersunk head style, 0.078 inches nominal width between flats, 0.2005 inches minimum and 0.2025 inches maximum shank diameter

DAC	HCC	DMIL	RNCC
4	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	KE

Identification

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.

INC	FIIG	Concept	Condition
67165	A528U0	-	1

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Fastener Length

0.395 inches minimum and 0.415 inches maximum

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

flush countersunk

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Width Between Flats

0.078 inches nominal

Details

None.

Shank Diameter

0.2005 inches minimum and 0.2025 inches maximum

Details

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

Shank Style

pin-rivet, straight, threaded

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Head Major Diameter

0.386 inches maximum

Details

None.

Grip Length

0.313 inches minimum and 0.375 inches maximum

Details

A measurement of the longest dimension of the grip,in distinction from width.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Minimum Tensile Strength

180000 pounds per square inch

Details

The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

Nominal Thread Size

0.164 inches

Details

A designation that is used for the purpose of general identification of the thread.

Shear Strength

108000 single pounds per square inch

Details

The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

Countersink Angle

100.0 degrees nominal

Details

The included angle of the countersink.

Heat Treatment

as fabricated overall

Details

A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

Material

steel comp 8740 overall

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

mil-s-6049 mil spec single material response overall

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

cadmium overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

qq-p-416,ty 2,cl 2 fed spec single treatment response overall

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Thread Series Designator

uns

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
5320PL0737107	9009H	9	-	6	9	-	WP
5320-012-6-6P	S7549	5	-	5	9	-	KZ
MB30R-1005P	14283	6	-	5	2	-	9Z
ASPFF-DT06-06	17446	4	-	3	2	-	KZ
ASPFF-DT6-6	17446	6	-	5	2	-	9Z
MAFFF-DT066	98524	5	-	5	2	-	ZZ
ASPFF-DT6-6	29666	5	-	C	1	-	KE
C3629-6-6	81755	A	-	7	2	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
50420	-	Q	-

RVC	WCC	TCC	SHC
-	713	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MISSION SYSTEMS

CAGE: 26512

BETHPAGE , NY , 11714-1035

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5320-00-034-5213

What is the NIIN of the NSN 5320-00-034-5213?

The National Item Identification Number (NIIN) of the NSN 5320-00-034-5213 is 00-034-5213

When the NSN 5320-00-034-5213 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Sat, Oct 28, 1972

Does the NSN 5320-00-034-5213 contain any precious metals?

Type/content is unknown

Does the NSN 5320-00-034-5213 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.