Blind Rivet
RV1101-6-5
(NSN) National Stock Number
5320-00-006-2574
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
7616103000
Summary
0.531 inches maximum fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.200 inches minimum and 0.204 inches maximum shank diameter, self-plugging mechanically locked stem shank style, 0.349 inches minimum and 0.357 inches maximum head major diameter, serrated stem-type w expansion device
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00864 | A040A0 | - | 1 |
Specifications
Fastener Length
0.531 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Shank Diameter
0.200 inches minimum and 0.204 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
self-plugging mechanically locked stem
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Head Major Diameter
0.349 inches minimum and 0.357 inches maximum
Details
None.Expansion Device
serrated stem-type w
Details
The device by which the item is expanded and set.Grip Length
0.251 inches minimum and 0.312 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Countersink Angle
100.0 degrees nominal
Details
The included angle of the countersink.Special Features
stem dyed blue
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Heat Treatment
t-4 solution heat treated overall
Details
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.Material
aluminum alloy 2017 sleeve
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
aluminum alloy 7075 stem
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-430 fed spec single material response sleeve
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-430 fed spec single material response stem
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize overall or chromate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625,type 2,class 1 mil spec 1st treatment response overall or mil-c-5541,class 1a mil spec 2nd treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Specification/Standard Data
80205-nas1769 professional/industrial association standard
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| RV1101-6-5 | 92215 | 5 | - | 5 | 2 | - | KZ |
| RV1101-6-5 | 98996 | 4 | - | 5 | 9 | - | SE |
| NAS1769D6-5 | 80205 | 4 | - | 3 | 2 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54760 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
ALLFAST FASTENING SYSTEMS, LLC
CAGE: 53551
CITY OF INDUSTRY
, CA
, 91745-1001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5320-00-006-2574
What is the NIIN of the NSN 5320-00-006-2574?
The National Item Identification Number (NIIN) of the NSN 5320-00-006-2574 is 00-006-2574
When the NSN 5320-00-006-2574 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jun 16, 1972
Does the NSN 5320-00-006-2574 contain any precious metals?
Type/content is unknown
Does the NSN 5320-00-006-2574 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products