Blind Rivet

RV1101-5-4

RV1101-5-4
(NSN) National Stock Number
5320-00-006-0792
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
7616103000
Summary

0.437 inches maximum fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.172 inches minimum and 0.176 inches maximum shank diameter, self-plugging mechanically locked stem shank style, 0.282 inches minimum and 0.290 inches maximum head major diameter, serrated stem-type w expansion device

DAC HCC DMIL RNCC
3 - - 5
RNVC SADC MSDS RNAAC
2 - - ZG
Identification

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.

INC FIIG Concept Condition
00864 A040A0 - 1
Specifications
Fastener Length
0.437 inches maximum
Details The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
Head Style
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
Shank Diameter
0.172 inches minimum and 0.176 inches maximum
Details The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
Shank Style
self-plugging mechanically locked stem
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
Head Major Diameter
0.282 inches minimum and 0.290 inches maximum
Details None.
Expansion Device
serrated stem-type w
Details The device by which the item is expanded and set.
Grip Length
0.188 inches minimum and 0.250 inches maximum
Details A measurement of the longest dimension of the grip,in distinction from width.
Shear Strength
935 single pounds per square inch
Details The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
Countersink Angle
100.0 degrees nominal
Details The included angle of the countersink.
Special Features
stem dyed blue
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Heat Treatment
t-4 solution heat treated overall
Details A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
Material
aluminum alloy 2017 sleeve
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material
aluminum alloy 7075 stem
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
qq-a-430 fed spec single material response sleeve
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Material Document And Classification
qq-a-430 fed spec single material response stem
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
anodize overall or chromate overall
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment Document And Classification
mil-a-8625,type 2,class 1 mil spec 1st treatment response overall or mil-c-5541,class 1a mil spec 2nd treatment response overall
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Specification/Standard Data
80205-nas1769 professional/industrial association standard
Details The document designator of the specification or standard which established the item of supply.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
RV1101-5-4 53551 E - 5 2 - KZ
RV1101-5-4 92215 5 - 5 2 - KZ
RV1101-5-4 98996 4 - 5 9 - SE
NAS1769D5-4 80205 4 - 3 2 - KZ
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
54760 - U -
RVC WCC TCC SHC
- 576 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
FAIRCHILD FASTENERS EUROPE - VSD GMBH
CAGE: C4293
HILDESHEIM , 31135
GERMANY
View Products
FAQs
Frequently asked questions for NSN 5320-00-006-0792
What is the NIIN of the NSN 5320-00-006-0792?
The National Item Identification Number (NIIN) of the NSN 5320-00-006-0792 is 00-006-0792
When the NSN 5320-00-006-0792 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jun 14, 1972
Does the NSN 5320-00-006-0792 contain any precious metals?
Type/content is unknown
Does the NSN 5320-00-006-0792 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA