Blind Rivet

CR2172-6-6

(NSN) National Stock Number

5320-00-005-8314

Federal Supply Classification

5320 Rivets

Item Name Code

00864

Schedule B Code

7616103000

Summary

0.537 inches maximum fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.186 inches minimum and 0.190 inches maximum shank diameter, self-plugging mechanically locked stem shank style, 0.349 inches minimum and 0.357 inches maximum head major diameter, serrated stem-type w expansion device

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	ZZ

Identification

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.

INC	FIIG	Concept	Condition
00864	A040A0	-	1

Specifications

Fastener Length

0.537 inches maximum

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Shank Diameter

0.186 inches minimum and 0.190 inches maximum

Details

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

Shank Style

self-plugging mechanically locked stem

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Head Major Diameter

0.349 inches minimum and 0.357 inches maximum

Details

None.

Expansion Device

serrated stem-type w

Details

The device by which the item is expanded and set.

Grip Length

0.313 inches minimum and 0.375 inches maximum

Details

A measurement of the longest dimension of the grip,in distinction from width.

Shear Strength

1090 single pounds per square inch

Details

The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

Countersink Angle

99.0 degrees minimum and 101.0 degrees maximum

Details

The included angle of the countersink.

Heat Treatment

h-38 strain hardened locking ring

Details

A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

Material

aluminum alloy 5056 locking ring

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

qq-a-430 fed spec single material response locking ring

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

anodize overall or chromate overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

mil-a-8625 mil spec 1st treatment response overall or mil-c-5541 mil spec 2nd treatment response overall

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Specification/Standard Data

80205-nas1399 professional/industrial association standard

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
10123390	A486G	9	-	6	9	-	WF
RV1201-6-6	C4293	3	-	5	2	-	ZG
RV1201-6-6	53551	5	-	3	2	-	KZ
RV1301-6-6	53551	5	-	5	2	-	ZZ
RV1341D6-6	53551	5	-	5	9	-	KZ
RV1201-6-6	92215	5	-	5	2	-	KZ
RV1201-6-6	98996	4	-	5	9	-	SE
3M1235D6-6	76301	5	-	5	2	-	ZZ
NAS1399D6A6	80205	4	-	3	2	-	KZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
54760	-	U	-

RVC	WCC	TCC	SHC
-	576	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

SPS TECHNOLOGIES, LLC DBA CHERRY AEROSPACE DIV DIV CHERRY AEROSPACE

CAGE: 11815

SANTA ANA , CA , 92705-5414

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5320-00-005-8314

What is the NIIN of the NSN 5320-00-005-8314?

The National Item Identification Number (NIIN) of the NSN 5320-00-005-8314 is 00-005-8314

When the NSN 5320-00-005-8314 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Sun, Jun 11, 1972

Does the NSN 5320-00-005-8314 contain any precious metals?

Type/content is unknown

Does the NSN 5320-00-005-8314 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.