Blind Rivet
RV1200-8-7
(NSN) National Stock Number
5320-00-005-8306
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
-
Summary
0.635 inches maximum fastener length, universal head style, 0.107 inches minimum and 0.117 inches maximum head height, 0.249 inches minimum and 0.253 inches maximum shank diameter, self-plugging mechanically locked stem shank style, 0.475 inches minimum and 0.525 inches maximum head major diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZG |
Identification
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00864 | A040A0 | - | 1 |
Specifications
Fastener Length
0.635 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
universal
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.107 inches minimum and 0.117 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Shank Diameter
0.249 inches minimum and 0.253 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
self-plugging mechanically locked stem
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Head Major Diameter
0.475 inches minimum and 0.525 inches maximum
Details
None.Expansion Device
serrated stem-type w
Details
The device by which the item is expanded and set.Grip Length
0.376 inches minimum and 0.437 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Shear Strength
1920 single pounds per square inch
Details
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.Heat Treatment
h-38 strain hardened locking ring
Details
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.Material
aluminum alloy 5056 locking ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-430 fed spec single material response locking ring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize body
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
chromate stem
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625 mil spec single treatment response body
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
mil-c-5541 mil spec single treatment response stem
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Specification/Standard Data
80205-nas1398 professional/industrial association standard
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| RV1200-8-7 | 53551 | E | - | 3 | 2 | - | KZ |
| RV1200-8-7 | 92215 | 5 | - | 5 | 2 | - | KZ |
| RV1200-8-7 | 98996 | 4 | - | 5 | 9 | - | SE |
| NAS1398D8A7 | 80205 | 4 | - | 3 | 2 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 05720 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5320-00-005-8306
What is the NIIN of the NSN 5320-00-005-8306?
The National Item Identification Number (NIIN) of the NSN 5320-00-005-8306 is 00-005-8306
When the NSN 5320-00-005-8306 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sun, Jun 11, 1972
Does the NSN 5320-00-005-8306 contain any precious metals?
Does not contain precious metal
Does the NSN 5320-00-005-8306 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products