Solenoid Valve
1453727
(NSN) National Stock Number
4810-00-525-1181
Federal Supply Classification
4810 Powered Valves
Item Name Code
10998
Schedule B Code
8481809005
Summary
Right-hand 1st end thread direction, right-hand 2nd end thread direction, disk flow control device, open flow control device normal operation position, 185.0 deg fahrenheit single response maximum operating temp, plain,optional end(pipe) 1st end connection style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
Identification
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes:valve (1), butterfly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 10998 | A046B0 | 1 | 1 |
Specifications
Thread Direction
right-hand 1st end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand 2nd end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Flow Control Device
disk
Details
The part that controls the flow through the item.Flow Control Device Normal Operation Position
open
Details
The position of the moving member/s/ controlling flow through the valve with the solenoid in the de-energized position.Maximum Operating Temp
185.0 deg fahrenheit single response
Details
The maximum temperature at which the item is rated to operate for an extended period of time.Connection Style
plain,optional end(pipe) 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Connection Style
plain,optional end(pipe) 2nd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Current Rating In Amps
0.200
Details
The electrical current rating,expressed in amperes.Valve Operation Method
solenoid
Details
The means used to control the operation of the valve.Connection Type
threaded internal pipe 1st end
Details
Indicates the type of connection/s/.Connection Type
threaded internal pipe 2nd end
Details
Indicates the type of connection/s/.Mounting Position
horizontal or vertical
Details
The installed position for which the item is designed.Maximum Operating Pressure
150.0 pounds per square inch single response
Details
The maximum pressure at which the item is rated for operation.Nominal Thread Size
0.500 inches 1st end
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.250 inches 2nd end
Details
A designation that is used for the purpose of general identification of the thread.Voltage In Volts And Current Type
115.0 ac
Details
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.Phase
single
Details
The number of alternating current phases.Frequency In Hertz
60.0
Details
The cycles per second /hertz/ of the alternating current.Material
steel corrosion resisting overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Media For Which Designed
air single response
Details
The type of media for which the item is designed.Style Designator
cross
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
npt 2nd end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
npt 1st end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| V55LR2150 | 81978 | 6 | - | 3 | 2 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 29300 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 594 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
CAGE: 10001
WASHINGTON
, DC
, 20376
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 4810-00-525-1181
What is the NIIN of the NSN 4810-00-525-1181?
The National Item Identification Number (NIIN) of the NSN 4810-00-525-1181 is 00-525-1181
When the NSN 4810-00-525-1181 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Fri, Aug 23, 1974
Does the NSN 4810-00-525-1181 contain any precious metals?
Does not contain precious metal
Does the NSN 4810-00-525-1181 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products