Flat Washer

MS15795-18

MS15795-18
(NSN) National Stock Number
5310-00-809-5998
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
13393
Schedule B Code
7318220000
Summary

Rectangular cross-sectional shape style, 0.526 inches minimum and 0.546 inches maximum hole diameter, round peripheral shape style, round center hole shape style, 0.074 inches minimum and 0.121 inches maximum thickness, 1.055 inches minimum and 1.092 inches maximum overall diameter

DAC HCC DMIL RNCC
6 - - C
RNVC SADC MSDS RNAAC
1 AC - ZZ
Identification

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

INC FIIG Concept Condition
13393 A022B0 1 1
Specifications
Cross-Sectional Shape Style
rectangular
Details The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
Hole Diameter
0.526 inches minimum and 0.546 inches maximum
Details The length of a straight line which passes through the center of a hole,and terminates at the circumference.
Peripheral Shape Style
round
Details The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.
Center Hole Shape Style
round
Details The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
Thickness
0.074 inches minimum and 0.121 inches maximum
Details A measurement of the smallest dimension of an item,in distinction from length or width.
Overall Diameter
1.055 inches minimum and 1.092 inches maximum
Details A measurement of the longest straight line across a circular cross-sectional plane.
End Item Identification
w/s: aircraft, awacs, e-3a; shipboard material handling equipment (mhe); trainer, b-1b aircraft; fire pumps; vehicle, aircraft refueler 4-14; stream (std. tensioned replenishment at sea method); elevators, aircraft; airborne mobile dir air spt ctl (2id),(; medium mine protected vehicle - ampv; armored multi-purpose vehicle (ampv); mrap buffalo mk2a2; multiple launch rocket system (mlrs); a4 bradley fighting vehicle; a3 bradley fighting vehicle; high-mobility artillery rocket system (himars); logistics support vessel
Details The national stock number or the identification information of the end equipment for which the item is a part.
Material
steel overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
66 fed std single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
cadmium and chromate overall
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment Document And Classification
qq-p-416,ty 2,cl 3 fed spec single treatment response overall
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Nondefinitive Spec/Std Data
a type and 1 grade and a class
Details The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
Departure From Cited Document
as modified by the finish
Details The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
656-048 94223 4 - 5 2 - ZC
10082609 A486G 9 - 6 9 - WF
103343 D9182 6 - C 1 - ZZ
15001-8 D9182 6 - C 1 - ZZ
920J529-301 D9182 6 - C 1 - ZZ
D1464 D9182 6 - C 1 - ZZ
LS1785-816 D9182 6 - C 1 - ZZ
MS15795-218 D9182 6 - C 1 - ZZ
410060179 S5652 1 - 8 2 - ZR
MS27183-18 A9271 5 - 5 2 - ZR
5310008095998 SCY13 9 - 5 9 - YP
303775 H0G87 4 - 5 2 - ZN
5310PL0775805 9009H 9 - 6 9 - WP
5310PL1439331 9009H 9 - 6 9 - WP
62.11.068 0124B 3 - 5 9 - YB
904233 A274N 3 - 5 2 - 9Z
122-5277661 ITEM 32 53711 5 - C 1 - ZZ
206485PC9 53711 6 - C 1 - ZZ
PL-H200667D001 REV R IT NO 7 98523 5 - C 1 - ZZ
PL-H6915D001 IT NO 23 98523 5 - C 1 - ZZ
PL-H6919D001 REV B IT NO 3 98523 5 - C 1 - ZZ
PL-H691D001 REV B IT NO 23 98523 5 - C 1 - ZZ
70026-18 95097 5 - 5 9 - SE
91083A033 39428 E - 5 1 - ZZ
SCD13617-8 80063 X - 5 1 - XX
FFW92TYPEAGRADE1CLASSA 81348 E - 4 1 - XX
C4524-380-16 60532 1 - 5 1 - PA
4363 23834 5 - 5 1 - CT
37584 96046 5 - 5 1 - CT
4703-4 0W357 5 - 5 1 - CT
772D435ITEM20 04808 2 - 5 1 - KZ
D12420-5 91340 X - 5 1 - XX
MS27183-18 96906 E - 2 2 - XX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
55210 - U -
RVC WCC TCC SHC
- 713 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
ZF INDUSTRIEANTRIEBE WITTEN GMBH
CAGE: D9182
WITTEN , 58455
GERMANY
View Products
FAQs
Frequently asked questions for NSN 5310-00-809-5998
What is the NIIN of the NSN 5310-00-809-5998?
The National Item Identification Number (NIIN) of the NSN 5310-00-809-5998 is 00-809-5998
When the NSN 5310-00-809-5998 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Mon, Jan 1, 1962
Does the NSN 5310-00-809-5998 contain any precious metals?
Does not contain precious metal
Does the NSN 5310-00-809-5998 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA