Round Plain Nut
2-101-099-01C
(NSN) National Stock Number
5310-00-104-4675
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
15887
Schedule B Code
7318160000
Summary
3b thread class, right-hand thread direction, 3.240 inches minimum nut and 3.250 inches maximum nut counterbore diameter, 3.540 inches nominal small end diameter, 0.075 inches minimum and 0.082 inches maximum drive point depth, round nut style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. See also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15887 | A021A0 | 1 | 1 |
Specifications
Thread Class
3b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Counterbore Diameter
3.240 inches minimum nut and 3.250 inches maximum nut
Details
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.Small End Diameter
3.540 inches nominal
Details
The length of a straight line which passes through the center of the small end,and terminates at the circumference.Drive Point Depth
0.075 inches minimum and 0.082 inches maximum
Details
None.Nut Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Diameter
3.755 inches minimum and 3.760 inches maximum
Details
None.Nut Thickness
0.718 inches minimum and 0.720 inches maximum
Details
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.Drive Point Width
0.375 inches nominal
Details
None.Undercut Thickness
0.005 inches minimum and 0.015 inches maximum
Details
None.Drive Point Quantity
8
Details
None.Nut Counterbore Depth
0.073 inches minimum nut and 0.078 inches maximum nut
Details
The measurement of the enlarged portion adjacent to the threaded portion of a nut,in distinction from height.Thread Series
uns
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
12
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Hardness Rating
34.0 rockwell c minimum and 37.0 rockwell c maximum
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Nominal Thread Size
3.094 inches
Details
A designation that is used for the purpose of general identification of the thread.Countersink Angle
45.0 degrees nominal nut
Details
The included angle of the countersink.Material
steel comp 4140 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6382 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
phosphate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
ams 2481 assn std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 2-101-099-01 | 99193 | 1 | - | 3 | 2 | - | CT |
| 2-101-099-01 | 50888 | 2 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - PHOENIX
CAGE: 99193
PHOENIX
, AZ
, 85034-2802
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-00-104-4675
What is the NIIN of the NSN 5310-00-104-4675?
The National Item Identification Number (NIIN) of the NSN 5310-00-104-4675 is 00-104-4675
When the NSN 5310-00-104-4675 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, Jun 19, 1968
Does the NSN 5310-00-104-4675 contain any precious metals?
Type/content is unknown
Does the NSN 5310-00-104-4675 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products