Lock Washer
MS35338-50
(NSN) National Stock Number
5310-00-004-5034
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
14218
Schedule B Code
7318210000
Summary
0.636 inches minimum and 0.653 inches maximum hole diameter, 1.079 inches maximum outside diameter, 0.156 inches minimum and 0.166 inches maximum material thickness, 45.0 rockwell c minimum and 53.0 rockwell c maximum hardness rating, certified free from mercury contamination special features, steel comp 1060 overall or steel comp 1070 overall or steel comp 1078 overall or steel comp 1080 overall material
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | HX |
Identification
A washer, usually round, with a centrally-located hole. Its edges and two bearing surfaces are designed in such a way that applied pressure brings into play the spring tension and/or frictional locking principle that materially resists any tendency toward turning. It may be made of one or two pieces.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 14218 | A022B0 | 1 | 1 |
Specifications
Hole Diameter
0.636 inches minimum and 0.653 inches maximum
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Outside Diameter
1.079 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Material Thickness
0.156 inches minimum and 0.166 inches maximum
Details
A measurement of the smallest dimension of the material,in distinction from length or width.Hardness Rating
45.0 rockwell c minimum and 53.0 rockwell c maximum
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Special Features
certified free from mercury contamination
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 1060 overall or steel comp 1070 overall or steel comp 1078 overall or steel comp 1080 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
66 fed std all material responses overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Surface Treatment Document And Classification
qq-p-416,ty 2,cl 3 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
split helical-right hand
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Nondefinitive Spec/Std Data
2 style and a class
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Departure From Cited Document
material must conform to ships parts control center special quality control provisions
Details
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 5310000045034 | A00AM | 9 | - | 6 | 9 | - | YP |
| 5310PL0776522 | 9009H | 9 | - | 6 | 9 | - | WP |
| 104J005-30 | 62793 | 5 | - | 5 | 9 | - | HX |
| 004-003005-059 | 26916 | E | - | 3 | 2 | - | KZ |
| FFW84 | 81348 | 4 | - | 4 | 1 | - | HX |
| 004-003005-059 | 44616 | 5 | - | 3 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 55210 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 5310-00-004-5034
What is the NIIN of the NSN 5310-00-004-5034?
The National Item Identification Number (NIIN) of the NSN 5310-00-004-5034 is 00-004-5034
When the NSN 5310-00-004-5034 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jun 7, 1972
Does the NSN 5310-00-004-5034 contain any precious metals?
Does not contain precious metal
Does the NSN 5310-00-004-5034 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products