Hexagon Plain Nut
2576715
(NSN) National Stock Number
5310-00-004-2697
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
01857
Schedule B Code
7318160000
Summary
+0.4487 to 0.4513 inches thread pitch diameters, right-hand thread direction, hexagon nut style, 0.157 inches minimum and 0.167 inches maximum nut height, 0.094 inches minimum and 0.096 inches maximum drilled hole diameter, 2 drilled hole type and quantity
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01857 | A021A0 | 1 | 1 |
Specifications
Thread Pitch Diameters
+0.4487 to 0.4513 inches
Details
The minimum and maximum pitch diameter limits of a straight screw thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Nut Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Height
0.157 inches minimum and 0.167 inches maximum
Details
None.Drilled Hole Diameter
0.094 inches minimum and 0.096 inches maximum
Details
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.Hole Type And Quantity
2 drilled
Details
Indicates the type and number of holes provided.Width Across Flats
0.871 inches minimum and 0.875 inches maximum
Details
The shortest straight line between flats,perpendicular to the height.Thread Series
uns
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.469 inches
Details
A designation that is used for the purpose of general identification of the thread.Hole Configuration Style
configuration a
Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Countersink Angle
82.0 degrees nominal nut
Details
The included angle of the countersink.Bearing Surface Type
chamfered
Details
Indicates the type of bearing surface.Bearing Surface Finish
125.0 microinches
Details
Designates the specific roughness rating of the bearing surface,representing the arithmetic average deviation of the surface from the meanline in profile.Part Name Assigned By Controlling Agency
navy special project
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Special Features
holes are centered 0.060 in. porm 0.003 from bearing surface
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-6758,cond f4 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium and chromate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,ty 2,cl 2 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48940 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
CAGE: 10001
WASHINGTON
, DC
, 20376
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-00-004-2697
What is the NIIN of the NSN 5310-00-004-2697?
The National Item Identification Number (NIIN) of the NSN 5310-00-004-2697 is 00-004-2697
When the NSN 5310-00-004-2697 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sun, Sep 24, 1972
Does the NSN 5310-00-004-2697 contain any precious metals?
Does not contain precious metal
Does the NSN 5310-00-004-2697 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5310-00-004-2697?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.