Threaded Tapered Pin
240-5117903
(NSN) National Stock Number
5315-00-209-7955
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
05444
Schedule B Code
-
Summary
Chamfered first end style, chamfered second end style, 3a thread class, right-hand thread direction, 0.430 inches minimum and 0.490 inches maximum thread length, 2.190 inches nominal taper length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A cone-shaped headless item, having a threaded portion at either end. It is used for aligning, fastening, and the like by fitting into a corresponding taper reamed hole.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 05444 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Second End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.430 inches minimum and 0.490 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Taper Length
2.190 inches nominal
Details
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.Taper Minor Diameter
0.353 inches minimum and 0.357 inches maximum
Details
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.Taper Major Diameter
0.500 inches nominal
Details
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.First End Taper Length
0.030 inches nominal
Details
None.Second End Taper Length
0.030 inches nominal
Details
A measurement of the longest taper dimension at the second end,in distinction from width.Grip Length
1.985 inches minimum and 2.015 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Second End Relationship With First End
not identical
Details
Indicates whether or not the second end is identical to the first end.Nominal Thread Size
0.312 inches
Details
A designation that is used for the purpose of general identification of the thread.Taper
0.500 per foot in inches
Details
The amount of taper measured parallel to the longitudinal axis of the item per specific measurement scale.First End Location
threaded end
Details
Indicates the location of the first end.First End Taper Angle
45.0 degrees nominal
Details
None.Second End Taper Angle
45.0 degrees nominal
Details
None.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-7108 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
threaded at small end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 240-5117903 | 63910 | 5 | - | 5 | 9 | - | ZZ |
| 240-5117903 | 0WLU1 | 5 | - | 5 | 9 | - | ZZ |
| 240-5117903 | 7B709 | 5 | - | 3 | 9 | - | ZZ |
| 240-5117903 | 14170 | 5 | - | 5 | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5315-00-209-7955
What is the NIIN of the NSN 5315-00-209-7955?
The National Item Identification Number (NIIN) of the NSN 5315-00-209-7955 is 00-209-7955
When the NSN 5315-00-209-7955 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5315-00-209-7955 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-209-7955 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products