Headless Straight Pin
148B2706PC10032
(NSN) National Stock Number
5315-00-003-4032
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
02390
Schedule B Code
7319409000
Summary
Chamfered first end style, radius second end style, 1.988 inches minimum and 2.012 inches maximum pin overall length, 1.0009 inches minimum and 1.0011 inches maximum pin overall diameter, 0.071 inches nominal first end taper length, not identical second end relationship with first end
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | HX |
Identification
A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also pin,straight,threaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02390 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Second End Style
radius
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Pin Overall Length
1.988 inches minimum and 2.012 inches maximum
Details
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.Pin Overall Diameter
1.0009 inches minimum and 1.0011 inches maximum
Details
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.First End Taper Length
0.071 inches nominal
Details
None.Second End Relationship With First End
not identical
Details
Indicates whether or not the second end is identical to the first end.First End Taper Angle
8.0 degrees minimum and 12.0 degrees maximum
Details
None.Surface Finish
32.0 microinches outside diameter
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Reference Number Differentiating Characteristics
material must conform to ships parts control center special quality control provisions
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 148B2706PC10032 | 06374 | 5 | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FLUOR MARINE PROPULSION, LLC DBA KNOLLS ATOMIC POWER LABORATORY
CAGE: 04241
SCHENECTADY
, NY
, 12309-1103
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5315-00-003-4032
What is the NIIN of the NSN 5315-00-003-4032?
The National Item Identification Number (NIIN) of the NSN 5315-00-003-4032 is 00-003-4032
When the NSN 5315-00-003-4032 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, May 24, 1972
Does the NSN 5315-00-003-4032 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-003-4032 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products