Headed Straight Pin
964D294PC4
(NSN) National Stock Number
5315-00-003-3972
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
02384
Schedule B Code
7319409000
Summary
Flat chamfer head style, 0.040 inches nominal chamfer length, 0.2498 inches minimum and 0.2500 inches maximum diameter, 1.260 inches nominal under head length, one end drilled hole arrangement style, 0.094 inches minimum and 0.097 inches maximum first hole diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | HX |
Identification
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes:pin, eccentric.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02384 | A212A0 | - | 1 |
Specifications
Head Style
flat chamfer
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Chamfer Length
0.040 inches nominal
Details
A measurement of the longest dimension of the chamfer,in distinction from width.Diameter
0.2498 inches minimum and 0.2500 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.Under Head Length
1.260 inches nominal
Details
None.Hole Arrangement Style
one end drilled
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.First Hole Diameter
0.094 inches minimum and 0.097 inches maximum
Details
None.Distance From Centerline Of Hole To End Of Pin
0.170 inches nominal
Details
None.Pin Chamfer Angle
45.0 degrees nominal
Details
None. replaced by mrc csyt with isac 0368.Pin Head Diameter
0.375 inches nominal
Details
None.Surface Finish
32.0 microinches outside diameter
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Height
0.180 inches nominal
Details
A measurement from the bottom to the top of an object,in distinction from depth.Material
steel comp 304 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a276 cond a assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Style Designator
straight
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Reference Number Differentiating Characteristics
material must conform to ships parts control center special quality control provisions
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5315-00-003-3972
What is the NIIN of the NSN 5315-00-003-3972?
The National Item Identification Number (NIIN) of the NSN 5315-00-003-3972 is 00-003-3972
When the NSN 5315-00-003-3972 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, May 24, 1972
Does the NSN 5315-00-003-3972 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-003-3972 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.