Stud Terminal

10-820-4-01

(NSN) National Stock Number

5940-00-060-2429

Federal Supply Classification

5940 Lugs, Terminals and Terminal Strips

Item Name Code

00887

Schedule B Code

8536904000

Summary

0.152 inches terminal length, 0.338 inches overall height, 0.125 inches overall diameter, 0.040 inches single end largest diameter, uninsulated electrical insulation feature, swage mounting method style

DAC	HCC	DMIL	RNCC
4	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	ZZ

Identification

A terminal, generally postlike, having an axial portion of its body designed for projecting through or into a panel, or the like, for mounting. Requires the use of tool(s) for attachment of wire. The conductor connection may be insulated from the mounting. Excludes:terminal, feedthru. See also terminal, quick disconnect and terminal set, quick disconnect.

INC	FIIG	Concept	Condition
00887	A006B0	1	1

Specifications

Terminal Length

0.152 inches

Details

A measurement of the longest dimension of the terminal,in distinction from width.

Overall Height

0.338 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Diameter

0.125 inches

Details

A measurement of the longest straight line across a circular cross-sectional plane.

Largest Diameter

0.040 inches single end

Details

The length of a straight line which passes through the center of a circular figure or body,and terminates at the largest circumference.

Electrical Insulation Feature

uninsulated

Details

The feature consisting of sleeves,covering,caps,mounting bushings and the like,used to electrically insulate an item.

Mounting Method Style

swage

Details

The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.

Minor Bushing Length

0.165 inches

Details

None.

Swage Depth

0.062 inches

Details

None.

Swage Outside Diameter

0.090 inches

Details

None.

Basic Shape Style

nontubular, round

Details

The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.

Conductor Accommodation Type

pin single end

Details

Indicates the type of connector or conductor accommodation included on the item.

Material

copper alloy overall

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

qq-b-626,1/2h fed spec single material response overall

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Precious Material And Location

overall outer surfaces silver

Details

An indication of the precious material and its location in the item.

Precious Material And Weight

0.040 silver grains, troy

Details

An indication of the precious material contained in the item,and the amount per a measurement scale.

Precious Material

silver

Details

Identification of the precious material contained in the item.

Surface Treatment

silver overall single layer

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

qq-s-365 fed spec single treatment response overall single layer

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Test Data Document

13499-306-0972-00 thru 306-0975-00 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
229-6019-68	98291	5	-	3	2	-	CX
306-0975-00	13499	5	-	5	9	-	CX
1P4-26D	86577	X	-	5	9	-	XX
10-820-4	18310	5	-	3	1	-	CX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	S	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34570	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

CONCORD ELECTRONICS, INC.

CAGE: 18310

LONG ISLAND CITY , NY , 11101-2432

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5940-00-060-2429

What is the NIIN of the NSN 5940-00-060-2429?

The National Item Identification Number (NIIN) of the NSN 5940-00-060-2429 is 00-060-2429

When the NSN 5940-00-060-2429 was assigned to the Federal Catalog?

It was assigned 61 years ago, on Tue, Jan 1, 1963

Does the NSN 5940-00-060-2429 contain any precious metals?

Contains silver

Does the NSN 5940-00-060-2429 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.