Tube to Boss Tee
CVC4260S060604
(NSN) National Stock Number
4730-00-403-4708
Federal Supply Classification
4730 Hose, Pipe, Tube, Lubrication and Railing Fittings
Item Name Code
22683
Schedule B Code
7609000000
Summary
3a 2nd end thread class, 3a 1st end thread class, 3b 3rd end thread class, flareless (tube) 2nd end connection style, flareless (tube) 1st end connection style, gasket seal (boss) 3rd end connection style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
Identification
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also tee, tube; and tee, pipe to tube. Excludes:connector, multiple, fluid pressure line.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22683 | A080B0 | - | 1 |
Specifications
Thread Class
3a 2nd end
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Class
3a 1st end
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Class
3b 3rd end
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Connection Style
flareless (tube) 2nd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Connection Style
flareless (tube) 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Connection Style
gasket seal (boss) 3rd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Leg Length
1.180 inches nominal 2nd end
Details
A measurement of the longest dimension of the leg,in distinction from width.Leg Length
1.914 inches nominal 1st end
Details
A measurement of the longest dimension of the leg,in distinction from width.Leg Length
0.836 inches nominal 3rd end
Details
A measurement of the longest dimension of the leg,in distinction from width.Connection Type
threaded external tube 1st end
Details
Indicates the type of connection/s/.Connection Type
threaded external tube 2nd end
Details
Indicates the type of connection/s/.Connection Type
threaded internal boss 3rd end
Details
Indicates the type of connection/s/.Maximum Operating Pressure
3000.0 pounds per square inch single response
Details
The maximum pressure at which the item is rated for operation.Nominal Thread Size
0.438 inches 3rd end
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.562 inches 1st end
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.562 inches 2nd end
Details
A designation that is used for the purpose of general identification of the thread.Seat Angle
12.0 degrees 1st end
Details
The angle of the end surface upon which the mated surface seats.Seat Angle
12.0 degrees 2nd end
Details
The angle of the end surface upon which the mated surface seats.Nominal Outside Diameter Tube Accommodated
0.375 inches 2nd end
Details
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.Nominal Outside Diameter Tube Accommodated
0.375 inches 1st end
Details
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.Special Features
first end bulkhead,unjf,0.562 in. td size,3a class
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
aluminum alloy 7075 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-367,t73 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize inside
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
anodize outside
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625,ty 2 mil spec single treatment response inside
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
mil-a-8625,type 2 mil spec single treatment response outside
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unjf 3rd end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unjf 1st end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unjf 2nd end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| CVC4260W060604 | 14728 | 6 | - | 3 | 2 | - | AX |
| CVC4260W060604 | 80378 | 1 | - | 3 | 2 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 00000 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
W AND G MACHINE COMPANY, INCORPORATED
CAGE: 33682
HAMDEN
, CT
, 06517-0187
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 4730-00-403-4708
What is the NIIN of the NSN 4730-00-403-4708?
The National Item Identification Number (NIIN) of the NSN 4730-00-403-4708 is 00-403-4708
When the NSN 4730-00-403-4708 was assigned to the Federal Catalog?
It was assigned 54 years ago, on Mon, Jun 29, 1970
Does the NSN 4730-00-403-4708 contain any precious metals?
Type/content is unknown
Does the NSN 4730-00-403-4708 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products