Pipe Nipple

AS4842

(NSN) National Stock Number

4730-00-125-7996

Federal Supply Classification

4730 Hose, Pipe, Tube, Lubrication and Railing Fittings

Item Name Code

03782

Schedule B Code

7307994000

Summary

225.0 deg fahrenheit 1st response maximum operating temp, -65.0 deg fahrenheit 2nd response maximum operating temp, inverted flare (pipe) all ends connection style, 0.594 inches minimum 1st end leg length, 0.625 inches maximum 2nd end leg length, threaded external pipe all ends connection type

DAC	HCC	DMIL	RNCC
E	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	ZZ

Identification

A straight one-piece metallic pipe 12 inches(304 mm)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 mm)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 mm)see pipe as modified.

INC	FIIG	Concept	Condition
03782	A080B0	1	1

Specifications

Maximum Operating Temp

225.0 deg fahrenheit 1st response

Details

The maximum temperature at which the item is rated to operate for an extended period of time.

Maximum Operating Temp

-65.0 deg fahrenheit 2nd response

Details

The maximum temperature at which the item is rated to operate for an extended period of time.

Connection Style

inverted flare (pipe) all ends

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.

Leg Length

0.594 inches minimum 1st end

Details

A measurement of the longest dimension of the leg,in distinction from width.

Leg Length

0.625 inches maximum 2nd end

Details

A measurement of the longest dimension of the leg,in distinction from width.

Connection Type

threaded external pipe all ends

Details

Indicates the type of connection/s/.

Maximum Operating Pressure

3000.0 pounds per square inch single response

Details

The maximum pressure at which the item is rated for operation.

Nominal Thread Size

0.375 inches all ends

Details

A designation that is used for the purpose of general identification of the thread.

Seat Angle

30.0 degrees all ends

Details

The angle of the end surface upon which the mated surface seats.

Nominal Overall Length

1.469 inches

Details

The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Material

steel comp 316 overall

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

66,aisi fed std 1st material response overall

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Media For Which Designed

hydraulic fluid 1st response

Details

The type of media for which the item is designed.

Media For Which Designed

oxygen, gaseous 2nd response

Details

The type of media for which the item is designed.

Surface Treatment

passivate overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

mil-f-14072,e300,ty 2 mil spec single treatment response outside

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Surface Treatment Document And Classification

mil-s-5002 mil spec single treatment response inside

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Style Designator

center wrenching facility

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Thread Series Designator

anpt all ends

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
AN911-3K	22995	E	-	5	9	-	AX
AN911-3K	13899	E	-	5	1	-	AX
AN911-3K	14798	E	-	5	9	-	AX
AN911-3K	14397	E	-	5	9	-	AX
AN911-3K	06581	E	-	5	1	-	AX
AN911-3K	71563	E	-	5	9	-	AX
AN911-3K	00624	E	-	5	9	-	AX
AS4860	0U583	E	-	5	9	-	ZZ
AS4860K03	0U583	E	-	3	2	-	ZZ
SAE-AS4842	0U583	E	-	3	1	-	ZZ
AS4842	81343	E	-	5	9	-	ZZ
AS4860	81343	E	-	5	9	-	ZZ
AS4860K03	81343	E	-	5	9	-	ZZ
AN911-3K	88044	E	-	5	9	-	AX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
30000	-	W	-

RVC	WCC	TCC	SHC
-	576	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

SAE INTERNATIONAL

CAGE: 0U583

WARRENDALE , PA , 15086-7511

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 4730-00-125-7996

What is the NIIN of the NSN 4730-00-125-7996?

The National Item Identification Number (NIIN) of the NSN 4730-00-125-7996 is 00-125-7996

When the NSN 4730-00-125-7996 was assigned to the Federal Catalog?

It was assigned 56 years ago, on Wed, Nov 27, 1968

Does the NSN 4730-00-125-7996 contain any precious metals?

Type/content is unknown

Does the NSN 4730-00-125-7996 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.