Hose to Boss Elbow
2620-225X1PC312L1
3a 2nd end thread class, external seat for gasket seal (boss) 2nd end connection style, gripping nipple (nose) 1st end connection style, 3.420 inches nominal 2nd end leg length, 6.320 inches nominal 1st end leg length, threaded external boss 2nd end connection type
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | HD |
A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also elbow, hose; and elbow, tube to hose. Excludes:elbow, pipe to hose and items having flange ends.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22677 | A080B0 | - | 1 |
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Details
A measurement of the longest dimension of the leg,in distinction from width.Details
A measurement of the longest dimension of the leg,in distinction from width.Details
Indicates the type of connection/s/.Details
Indicates the type of connection/s/.Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Details
A designation that is used for the purpose of general identification of the thread.Details
The angle that the flow is turned from the straight flow.Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Details
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.Details
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the outside circumference.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Details
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.Details
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 4-191304-11/4-24 | 01276 | 6 | - | 3 | 1 | - | HD |
| 4C191304-1 1-4-24 | 01276 | 1 | - | 5 | 1 | - | HD |
| 4-191304-11/4-24L1 | 03950 | 6 | - | 5 | 2 | - | HD |
| 4C191304-1 1-4-24L1 | 03950 | 5 | - | 5 | 2 | - | HD |
| M1LH24135L1 | 03950 | 6 | - | 5 | 1 | - | HD |
| 2620-225X1PC312 | 43689 | 1 | - | 5 | 1 | - | HD |
| M1LH24135 | 81349 | 3 | - | 4 | 1 | - | HD |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 00000 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
What is the NIIN of the NSN 4730-00-054-9616?
When the NSN 4730-00-054-9616 was assigned to the Federal Catalog?
Does the NSN 4730-00-054-9616 contain any precious metals?
Does the NSN 4730-00-054-9616 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.