Hose Clamp
941RH-0388
3.500 inches minimum and 3.880 inches maximum inside diameter, 250.0 deg fahrenheit temp rating, 0.750 inches nominal overall width, self-locking hexagon nut fastening device type, feat criticality code justification, grumman a10 aircraft;weapon system essential special features
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
A clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. Excludes:clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13566 | A12700 | 1 | 1 |
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Details
Indicates the type of fastening device provided.Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 4730PL1893019 | 9009H | 9 | - | 6 | 9 | - | WP |
| 420-75-388SH | 00624 | E | - | 3 | 2 | - | AX |
| T40C-75-388-SB | 14242 | E | - | 3 | 2 | - | AX |
| T40C-75-388-SH | 14242 | 6 | - | 5 | 9 | - | AX |
| C410C-75-388-S1 | 54646 | 6 | - | 5 | 2 | - | AX |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49780 | - | T | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
What is the NIIN of the NSN 4730-00-032-2170?
When the NSN 4730-00-032-2170 was assigned to the Federal Catalog?
Does the NSN 4730-00-032-2170 contain any precious metals?
Does the NSN 4730-00-032-2170 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.