Nonmetallic Hose Assembly
FA3346GGG0350
(NSN) National Stock Number
4720-00-922-8341
Federal Supply Classification
4720 Hose and Flexible Tubing
Item Name Code
20311
Schedule B Code
-
Summary
Round cross-sectional shape style, 2b 1st end thread class, right-hand 1st end thread direction, 0.375 inches nominal inside diameter, -40.0 deg fahrenheit and 200.0 deg fahrenheit single response temp rating, 0.844 inches nominal outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
Identification
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes:hose assembly, air duct; and hose assembly, air duct, air breathing.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 20311 | A542A0 | - | 2 |
Specifications
Cross-Sectional Shape Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Thread Class
2b 1st end
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand 1st end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Inside Diameter
0.375 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Temp Rating
-40.0 deg fahrenheit and 200.0 deg fahrenheit single response
Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Outside Diameter
0.844 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Minimum Inside Bending Radius
5.000 inches
Details
The minimum inside bending radius formed without stressing or deformation of a flexible item.Exterior Color
black
Details
The hue or tint of the exterior of the item.Connection Style
swivel nut flare 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.End Connection Design
straight 1st end
Details
The physical configuration of the outside of the end connection.End Fitting Component And Material
complete fitting steel all ends
Details
The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.Fitting Component And Surface Treatment
complete fitting cadmium 1st end
Details
The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.Connection Type
threaded internal tube 1st end
Details
Indicates the type of connection/s/.Features Provided
reusable end fittings
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Thread Quantity Per Inch
12 1st end
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Burst Test Pressure
18000.0 pounds per square inch
Details
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.Layer Composition And Location
1st layer spirally laid steel wire and 2nd layer spirally laid steel wire and 3rd layer spirally laid steel wire and 4th layer spirally laid steel wire and outer layer molded rubber, synthetic
Details
The material and formation identifying the structural characteristic/s/ of the item and location.Maximum Operating Pressure
4500.0 pounds per square inch
Details
The maximum pressure at which the item is rated for operation.Nominal Thread Size
0.562 inches 1st end
Details
A designation that is used for the purpose of general identification of the thread.Seat Angle
37.0 degrees 1st end
Details
The angle of the end surface upon which the mated surface seats.Hydrostatic Test Pressure
9000.0 pounds per square inch
Details
A steady,uniform,internal,static pressure that the item must withstand without leakage,abnormal distortion,or damage.Outer Covering Environmental Protection
abrasion resistant and oil resistant
Details
The type of protection provided by the outer covering.Inside Surface Condition
smooth
Details
The condition of the item with respect to the texture of the inner surface.Measuring Method And Length
35.000 inches nominal overall
Details
The means used and the measurement of the longest dimension of an item.Special Features
inner conveying tube material-rubber, synthetic
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Media For Which Designed
fuel/oil, hydrocarbon and water single response
Details
The type of media for which the item is designed.Thread Series Designator
un 1st end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Specification/Standard Data
sae j517,100r9,type a-81343 national std/spec
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 6QSL6FJ6FJ-35 | 81300 | E | - | 5 | 2 | - | AX |
| E5992-22 | 72113 | 4 | - | 3 | 2 | - | HD |
| L2DC0606NJ06NJ-35 | 13174 | E | - | 5 | 9 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 52350 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 736 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 4720-00-922-8341
What is the NIIN of the NSN 4720-00-922-8341?
The National Item Identification Number (NIIN) of the NSN 4720-00-922-8341 is 00-922-8341
When the NSN 4720-00-922-8341 was assigned to the Federal Catalog?
It was assigned 59 years ago, on Sat, Dec 25, 1965
Does the NSN 4720-00-922-8341 contain any precious metals?
Type/content is unknown
Does the NSN 4720-00-922-8341 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products