Nonmetallic Hose Assembly
LT1-1150
(NSN) National Stock Number
4720-00-832-8968
Federal Supply Classification
4720 Hose and Flexible Tubing
Item Name Code
20311
Schedule B Code
-
Summary
Round cross-sectional shape style, 1.500 inches nominal inside diameter, -40.0 deg fahrenheit and 300.0 deg fahrenheit single response temp rating, 2.187 inches minimum and 2.312 inches maximum outside diameter, 22.000 inches minimum inside bending radius, black exterior color
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | AX |
Identification
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes:hose assembly, air duct; and hose assembly, air duct, air breathing.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 20311 | A542A0 | - | 2 |
Specifications
Cross-Sectional Shape Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Inside Diameter
1.500 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Temp Rating
-40.0 deg fahrenheit and 300.0 deg fahrenheit single response
Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Outside Diameter
2.187 inches minimum and 2.312 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Minimum Inside Bending Radius
22.000 inches
Details
The minimum inside bending radius formed without stressing or deformation of a flexible item.Exterior Color
black
Details
The hue or tint of the exterior of the item.Flange Outside Diameter
2.375 inches nominal 1st end
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Outside Diameter
2.375 inches nominal 2nd end
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Connection Style
plain w/ gasket groove (sae flanged head) 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Connection Style
plain w/ gasket groove (sae flanged head) 2nd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.End Flange Construction
solid 1st end
Details
The design used in constructing the end portion of the flange.End Flange Construction
solid 2nd end
Details
The design used in constructing the end portion of the flange.End Connection Design
elbow 2nd end
Details
The physical configuration of the outside of the end connection.End Connection Design
straight 1st end
Details
The physical configuration of the outside of the end connection.Connection Type
plain face flange 1st end
Details
Indicates the type of connection/s/.Connection Type
plain face flange 2nd end
Details
Indicates the type of connection/s/.Features Provided
reusable end fittings
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Burst Test Pressure
10000.0 pounds per square inch
Details
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.Layer Composition And Location
1st layer braided steel wire and outer layer rubber impregnated braided fabric
Details
The material and formation identifying the structural characteristic/s/ of the item and location.Maximum Operating Pressure
2500.0 pounds per square inch
Details
The maximum pressure at which the item is rated for operation.Hydrostatic Test Pressure
5000.0 pounds per square inch
Details
A steady,uniform,internal,static pressure that the item must withstand without leakage,abnormal distortion,or damage.Flow Angle
30.0 degrees 2nd end
Details
The angle that the flow is turned from the straight flow.Outer Covering Environmental Protection
oil resistant and weatherproof
Details
The type of protection provided by the outer covering.Inside Surface Condition
smooth
Details
The condition of the item with respect to the texture of the inner surface.Measuring Method And Length
42.562 inches nominal overall
Details
The means used and the measurement of the longest dimension of an item.Flange Style
round w/ out bolt holes 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.Flange Style
round w/ out bolt holes 2nd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.Media For Which Designed
fuel/oil, hydrocarbon single response
Details
The type of media for which the item is designed.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| FA4531PPP0423 | 01276 | E | - | 3 | 2 | - | AX |
| 13212E4152 | 97403 | 1 | - | 3 | 2 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 52350 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 736 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 4720-00-832-8968
What is the NIIN of the NSN 4720-00-832-8968?
The National Item Identification Number (NIIN) of the NSN 4720-00-832-8968 is 00-832-8968
When the NSN 4720-00-832-8968 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Tue, Mar 28, 1967
Does the NSN 4720-00-832-8968 contain any precious metals?
Type/content is unknown
Does the NSN 4720-00-832-8968 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products