Nonmetallic Hose Assembly

86A0100004C0100

(NSN) National Stock Number

4720-00-246-2583

Federal Supply Classification

4720 Hose and Flexible Tubing

Item Name Code

20311

Schedule B Code

4002700000

Summary

Round cross-sectional shape style, 3b 1st end thread class, right-hand 1st end thread direction, 0.219 inches nominal inside diameter, -65.0 deg fahrenheit and 400.0 deg fahrenheit single response temp rating, 0.420 inches nominal outside diameter

DAC	HCC	DMIL	RNCC
E	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	ZZ

Identification

A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes:hose assembly, air duct; and hose assembly, air duct, air breathing.

INC	FIIG	Concept	Condition
20311	A542A0	-	2

Specifications

Cross-Sectional Shape Style

round

Details

The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.

Thread Class

3b 1st end

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand 1st end

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Inside Diameter

0.219 inches nominal

Details

The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.

Temp Rating

-65.0 deg fahrenheit and 400.0 deg fahrenheit single response

Details

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.

Outside Diameter

0.420 inches nominal

Details

The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.

Minimum Inside Bending Radius

3.000 inches

Details

The minimum inside bending radius formed without stressing or deformation of a flexible item.

Connection Style

swivel nut flare 1st end

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.

End Connection Design

straight 1st end

Details

The physical configuration of the outside of the end connection.

Connection Type

threaded internal tube 1st end

Details

Indicates the type of connection/s/.

Burst Test Pressure

16000.0 pounds per square inch

Details

The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.

Layer Composition And Location

outer layer braided corrosion resistant steel wire and 1st layer braided corrosion resistant steel wire

Details

The material and formation identifying the structural characteristic/s/ of the item and location.

Maximum Operating Pressure

3000.0 pounds per square inch

Details

The maximum pressure at which the item is rated for operation.

Nominal Thread Size

0.438 inches 1st end

Details

A designation that is used for the purpose of general identification of the thread.

Seat Angle

37.0 degrees 1st end

Details

The angle of the end surface upon which the mated surface seats.

Hydrostatic Test Pressure

6000.0 pounds per square inch

Details

A steady,uniform,internal,static pressure that the item must withstand without leakage,abnormal distortion,or damage.

Outer Covering Environmental Protection

corrosion resistant and hydraulic solution resistant and fuel resistant

Details

The type of protection provided by the outer covering.

Inside Surface Condition

smooth

Details

The condition of the item with respect to the texture of the inner surface.

Measuring Method And Length

10.000 inches nominal overall

Details

The means used and the measurement of the longest dimension of an item.

Thread Series Designator

unjf 1st end

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Specification/Standard Data

81343-as627 professional/industrial association standard

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
000AE50-4-0100	50599	5	-	3	2	-	ZZ
R25800CC4-0100	50599	5	-	5	9	-	ZZ
R258EC0C0100	50599	5	-	5	9	-	ZZ
676120-4-0100	00624	6	-	5	9	-	ZZ
AE2460000E0100	00624	E	-	3	2	-	ZZ
21000004-0100	78570	G	-	5	9	-	ZZ
23000004-0100	78570	E	-	3	2	-	ZZ
66000004-0100	78570	6	-	5	2	-	AX
71A0100004C0100	79470	6	-	5	9	-	ZZ
AS604	0U583	E	-	5	1	-	ZZ
AS627-04-0100	0U583	E	-	3	2	-	ZZ
SAE-AS604	0U583	E	-	3	1	-	ZZ
AS604	81343	E	-	5	9	-	AX
AS627-04-0100	81343	E	-	3	9	-	AX
129041-4CR0100	98441	6	-	5	9	-	ZZ
170001-4CR0100	98441	E	-	3	2	-	ZZ
MS27363E0100	96906	E	-	5	9	-	AX