Nonmetallic Hose Assembly
12C12MS20MS49
(NSN) National Stock Number
4720-00-131-5505
Federal Supply Classification
4720 Hose and Flexible Tubing
Item Name Code
20311
Schedule B Code
-
Summary
Round cross-sectional shape style, right-hand 1st end thread direction, right-hand 2nd end thread direction, 0.750 inches nominal inside diameter, -40.0 deg fahrenheit and 200.0 deg fahrenheit single response temp rating, 1.250 inches nominal outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | AX |
Identification
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes:hose assembly, air duct; and hose assembly, air duct, air breathing.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 20311 | A542A0 | - | 2 |
Specifications
Cross-Sectional Shape Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Thread Direction
right-hand 1st end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand 2nd end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Inside Diameter
0.750 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Temp Rating
-40.0 deg fahrenheit and 200.0 deg fahrenheit single response
Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Outside Diameter
1.250 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Minimum Inside Bending Radius
9.500 inches
Details
The minimum inside bending radius formed without stressing or deformation of a flexible item.Connection Style
plain 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Connection Style
plain 2nd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.End Connection Design
straight 1st end
Details
The physical configuration of the outside of the end connection.End Connection Design
straight 2nd end
Details
The physical configuration of the outside of the end connection.End Fitting Component And Material
complete fitting steel all ends
Details
The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.Fitting Component And Surface Treatment
complete fitting cadmium 1st end
Details
The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.Connection Type
threaded external pipe 1st end
Details
Indicates the type of connection/s/.Connection Type
threaded external pipe 2nd end
Details
Indicates the type of connection/s/.Burst Test Pressure
9000.0 pounds per square inch
Details
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.Layer Composition And Location
1st layer braided steel wire and 2nd layer braided steel wire and 3rd layer braided cotton cord and outer layer molded rubber, synthetic
Details
The material and formation identifying the structural characteristic/s/ of the item and location.Maximum Operating Pressure
2250.0 pounds per square inch
Details
The maximum pressure at which the item is rated for operation.Nominal Thread Size
0.750 inches 1st end
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
1.250 inches 2nd end
Details
A designation that is used for the purpose of general identification of the thread.Seat Angle
30.0 degrees 1st end
Details
The angle of the end surface upon which the mated surface seats.Seat Angle
30.0 degrees 2nd end
Details
The angle of the end surface upon which the mated surface seats.Hydrostatic Test Pressure
4500.0 pounds per square inch
Details
A steady,uniform,internal,static pressure that the item must withstand without leakage,abnormal distortion,or damage.Outer Covering Environmental Protection
abrasion resistant and cold resistant and oil resistant and ozone resistant and weatherproof
Details
The type of protection provided by the outer covering.Inside Surface Condition
smooth
Details
The condition of the item with respect to the texture of the inner surface.Measuring Method And Length
49.000 inches nominal overall
Details
The means used and the measurement of the longest dimension of an item.Special Features
inner conveying tube material-rubber, synthetic
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Media For Which Designed
hydraulic fluid single response
Details
The type of media for which the item is designed.Thread Series Designator
nptf 2nd end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
nptf 1st end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 12C12MS20MS49 | 70434 | 6 | - | 5 | 9 | - | AX |
| 12C12MS20MS49 | 73842 | E | - | 5 | 9 | - | AX |
| 1504452 | 77237 | 5 | - | 3 | 2 | - | ZZ |
| 1504452 | 40152 | 5 | - | 3 | 9 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 52350 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 4720-00-131-5505
What is the NIIN of the NSN 4720-00-131-5505?
The National Item Identification Number (NIIN) of the NSN 4720-00-131-5505 is 00-131-5505
When the NSN 4720-00-131-5505 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Wed, Jan 8, 1969
Does the NSN 4720-00-131-5505 contain any precious metals?
Type/content is unknown
Does the NSN 4720-00-131-5505 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products