Nonmetallic Hose Assembly
193403
(NSN) National Stock Number
4720-00-122-4215
Federal Supply Classification
4720 Hose and Flexible Tubing
Item Name Code
20311
Schedule B Code
-
Summary
Round cross-sectional shape style, 1.000 inches nominal inside diameter, -40.0 deg fahrenheit and 200.0 deg fahrenheit single response temp rating, 0.320 inches nominal 1st end flange thickness, 0.320 inches nominal 2nd end flange thickness, 1.516 inches minimum and 1.609 inches maximum outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | D |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | AX |
Identification
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes:hose assembly, air duct; and hose assembly, air duct, air breathing.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 20311 | A542A0 | - | 2 |
Specifications
Cross-Sectional Shape Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Inside Diameter
1.000 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Temp Rating
-40.0 deg fahrenheit and 200.0 deg fahrenheit single response
Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Flange Thickness
0.320 inches nominal 1st end
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Flange Thickness
0.320 inches nominal 2nd end
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Outside Diameter
1.516 inches minimum and 1.609 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Minimum Inside Bending Radius
12.000 inches
Details
The minimum inside bending radius formed without stressing or deformation of a flexible item.Angle Between Rigid Elbow Fittings In Deg
0.0
Details
The amount of rotation in a counterclockwise direction needed to bring the centerline of one rigid elbow into coincidence with the centerline of the rigid elbow on the opposite end,expressed in degrees.Center To Center Distance Between Bolt Holes Along Width
0.924 inches nominal 1st end
Details
A measurement of the center to center distance between the bolt holes along the width.Center To Center Distance Between Bolt Holes Along Width
0.924 inches nominal 2nd end
Details
A measurement of the center to center distance between the bolt holes along the width.Center To Center Distance Between Bolt Holes Along Length
2.062 inches nominal 1st end
Details
A measurement of the center to center distance between the bolt holes along the length.Center To Center Distance Between Bolt Holes Along Length
2.062 inches nominal 2nd end
Details
A measurement of the center to center distance between the bolt holes along the length.Bolt Hole Quantity
4 2nd end
Details
The number of bolt holes provided on the item.Bolt Hole Quantity
4 1st end
Details
The number of bolt holes provided on the item.Flange Length
2.750 inches nominal 1st end
Details
A measurement of the longest dimension of a flange,in distinction from width.Flange Length
2.750 inches nominal 2nd end
Details
A measurement of the longest dimension of a flange,in distinction from width.Flange Width
2.222 inches nominal 2nd end
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Flange Width
2.722 inches nominal 1st end
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Connection Style
plain w/ gasket groove (sae flanged head) 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Connection Style
plain w/ gasket groove (sae flanged head) 2nd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Bolt Hole Diameter
0.430 inches nominal 1st end
Details
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.Bolt Hole Diameter
0.430 inches nominal 2nd end
Details
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.End Flange Construction
solid 1st end
Details
The design used in constructing the end portion of the flange.End Flange Construction
solid 2nd end
Details
The design used in constructing the end portion of the flange.End Connection Design
elbow 2nd end
Details
The physical configuration of the outside of the end connection.End Connection Design
elbow 1st end
Details
The physical configuration of the outside of the end connection.Connection Type
plain face flange 1st end
Details
Indicates the type of connection/s/.Connection Type
plain face flange 2nd end
Details
Indicates the type of connection/s/.Burst Test Pressure
8000.0 pounds per square inch
Details
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.Layer Composition And Location
2nd layer braided wire and outer layer molded rubber, synthetic and 1st layer braided wire
Details
The material and formation identifying the structural characteristic/s/ of the item and location.Maximum Operating Pressure
2000.0 pounds per square inch
Details
The maximum pressure at which the item is rated for operation.Hydrostatic Test Pressure
4000.0 pounds per square inch
Details
A steady,uniform,internal,static pressure that the item must withstand without leakage,abnormal distortion,or damage.Flow Angle
90.0 degrees 1st end
Details
The angle that the flow is turned from the straight flow.Flow Angle
90.0 degrees 2nd end
Details
The angle that the flow is turned from the straight flow.Outer Covering Environmental Protection
oil resistant and weatherproof
Details
The type of protection provided by the outer covering.Inside Surface Condition
smooth
Details
The condition of the item with respect to the texture of the inner surface.Measuring Method And Length
22.250 inches nominal overall
Details
The means used and the measurement of the longest dimension of an item.Flange Style
double oval (sae split type flange) 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.Flange Style
double oval (sae split type flange) 2nd end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.Media For Which Designed
fuel/oil, hydrocarbon single response
Details
The type of media for which the item is designed.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 16C-16SSF90-20SF90-2225 | 70434 | 6 | - | 5 | 9 | - | AX |
| 16C-16SSF90-20SF90-2225 | 63906 | 2 | - | 5 | 9 | - | AX |
| 16C-16SSF90-20SF90-2225 | 73842 | 6 | - | 5 | 9 | - | AX |
| 193403-1 | 30157 | 4 | - | 3 | 2 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 52350 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 4720-00-122-4215
What is the NIIN of the NSN 4720-00-122-4215?
The National Item Identification Number (NIIN) of the NSN 4720-00-122-4215 is 00-122-4215
When the NSN 4720-00-122-4215 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, Oct 30, 1968
Does the NSN 4720-00-122-4215 contain any precious metals?
Type/content is unknown
Does the NSN 4720-00-122-4215 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products