Nonmetallic Hose Assembly

AT28146

AT28146
(NSN) National Stock Number
4720-00-096-9060
Federal Supply Classification
4720 Hose and Flexible Tubing
Item Name Code
20311
Schedule B Code
-
Summary

Round cross-sectional shape style, right-hand 1st end thread direction, 1.000 inches nominal inside diameter, -40.0 deg fahrenheit and 200.0 deg fahrenheit single response temp rating, 0.317 inches nominal 2nd end flange thickness, 1.560 inches nominal outside diameter

DAC HCC DMIL RNCC
E - - 3
RNVC SADC MSDS RNAAC
2 - - ZZ
Identification

A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes:hose assembly, air duct; and hose assembly, air duct, air breathing.

INC FIIG Concept Condition
20311 A542A0 - 2
Specifications
Cross-Sectional Shape Style
round
Details The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
Thread Direction
right-hand 1st end
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Inside Diameter
1.000 inches nominal
Details The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
Temp Rating
-40.0 deg fahrenheit and 200.0 deg fahrenheit single response
Details A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
Flange Thickness
0.317 inches nominal 2nd end
Details A measurement of the smallest dimension of a flange,in distinction from length or width.
Outside Diameter
1.560 inches nominal
Details The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
Minimum Inside Bending Radius
12.000 inches
Details The minimum inside bending radius formed without stressing or deformation of a flexible item.
Flange Outside Diameter
1.750 inches nominal 2nd end
Details The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
Connection Style
plain 1st end
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
Connection Style
plain w/ gasket groove (sae flanged head) 2nd end
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
End Flange Construction
solid 2nd end
Details The design used in constructing the end portion of the flange.
End Connection Design
elbow 2nd end
Details The physical configuration of the outside of the end connection.
End Connection Design
straight 1st end
Details The physical configuration of the outside of the end connection.
Connection Type
plain face flange 2nd end
Details Indicates the type of connection/s/.
Connection Type
threaded external pipe 1st end
Details Indicates the type of connection/s/.
Burst Test Pressure
8000.0 pounds per square inch
Details The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.
Layer Composition And Location
2nd layer braided wire and 3rd layer molded rubber, synthetic and 1st layer molded rubber, synthetic
Details The material and formation identifying the structural characteristic/s/ of the item and location.
Maximum Operating Pressure
2500.0 pounds per square inch
Details The maximum pressure at which the item is rated for operation.
Nominal Thread Size
1.000 inches 1st end
Details A designation that is used for the purpose of general identification of the thread.
Flow Angle
90.0 degrees 2nd end
Details The angle that the flow is turned from the straight flow.
Inside Surface Condition
smooth
Details The condition of the item with respect to the texture of the inner surface.
Measuring Method And Length
30.500 inches nominal overall
Details The means used and the measurement of the longest dimension of an item.
Flange Style
round w/ out bolt holes 2nd end
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.
Media For Which Designed
hydraulic fluid single response
Details The type of media for which the item is designed.
Thread Series Designator
npt 1st end
Details A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
AT28146 75160 6 - 5 9 - AX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
52350 - W -
RVC WCC TCC SHC
- 736 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
DEERE & COMPANY
CAGE: 75755
MOLINE , IL , 61265-8010
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 4720-00-096-9060
What is the NIIN of the NSN 4720-00-096-9060?
The National Item Identification Number (NIIN) of the NSN 4720-00-096-9060 is 00-096-9060
When the NSN 4720-00-096-9060 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Dec 6, 1972
Does the NSN 4720-00-096-9060 contain any precious metals?
Type/content is unknown
Does the NSN 4720-00-096-9060 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA