Metallic Hose Assembly
S34812-1108W090
(NSN) National Stock Number
4720-00-043-3970
Federal Supply Classification
4720 Hose and Flexible Tubing
Item Name Code
17972
Schedule B Code
7307225000
Summary
Round cross-sectional shape style, 3b 1st end thread class, right-hand 1st end thread direction, 0.715 inches nominal inside diameter, 1.087 inches nominal outside diameter, 3.750 inches minimum inside bending radius
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A length of metallic hose with fittings on one or both ends. For items without fittings, see hose, metallic. Excludes:conduit, electrical; conduit assembly, electrical; casing, flexible control; and casing, flexible shaft assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 17972 | A542A0 | - | 1 |
Specifications
Cross-Sectional Shape Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Thread Class
3b 1st end
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand 1st end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Inside Diameter
0.715 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Outside Diameter
1.087 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Minimum Inside Bending Radius
3.750 inches
Details
The minimum inside bending radius formed without stressing or deformation of a flexible item.Inner Conveying Tube Style
annular open-pitch corrugated
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the inner conveying tube.Angle Between Rigid Elbow Fittings In Deg
180.0
Details
The amount of rotation in a counterclockwise direction needed to bring the centerline of one rigid elbow into coincidence with the centerline of the rigid elbow on the opposite end,expressed in degrees.Connection Style
swivel nut flare 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.End Connection Design
elbow 1st end
Details
The physical configuration of the outside of the end connection.Connection Type
threaded internal tube 1st end
Details
Indicates the type of connection/s/.Features Provided
identical ends
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Thread Quantity Per Inch
12 1st end
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Burst Test Pressure
4000.0 pounds per square inch
Details
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.Layer Composition And Location
outer layer braided corrosion resistant steel wire
Details
The material and formation identifying the structural characteristic/s/ of the item and location.Maximum Operating Pressure
1450.0 pounds per square inch
Details
The maximum pressure at which the item is rated for operation.Nominal Thread Size
1.062 inches 1st end
Details
A designation that is used for the purpose of general identification of the thread.Seat Angle
37.0 degrees 1st end
Details
The angle of the end surface upon which the mated surface seats.Flow Angle
90.0 degrees 1st end
Details
The angle that the flow is turned from the straight flow.Outer Covering Environmental Protection
corrosion resistant
Details
The type of protection provided by the outer covering.Measuring Method And Length
11.500 inches nominal working
Details
The means used and the measurement of the longest dimension of an item.Thread Series Designator
unj 1st end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 52350 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
SMITHS TUBULAR SYSTEMS-LACONIA, INC.
CAGE: 78570
LACONIA
, NH
, 03246-2935
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 4720-00-043-3970
What is the NIIN of the NSN 4720-00-043-3970?
The National Item Identification Number (NIIN) of the NSN 4720-00-043-3970 is 00-043-3970
When the NSN 4720-00-043-3970 was assigned to the Federal Catalog?
It was assigned 64 years ago, on Sun, Jan 1, 1961
Does the NSN 4720-00-043-3970 contain any precious metals?
Type/content is unknown
Does the NSN 4720-00-043-3970 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.