Spur Gear
364804-1
(NSN) National Stock Number
3020-00-003-6298
Federal Supply Classification
3020 Gears, Pulleys, Sprockets and Transmission Chain
Item Name Code
05466
Schedule B Code
8483409000
Summary
Plain, solid body style, 0.7917 inches nominal pitch diameter, 19 teeth quantity, w/ keyway both ends bore style, 33.0 rockwell c minimum and 43.0 rockwell c maximum teeth hardness rating, 0.878 inches nominal outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also gear, antibacklash, spur. For bulk material, see rod, pinion.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 05466 | A27300 | 1 | 1 |
Specifications
Body Style
plain, solid
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pitch Diameter
0.7917 inches nominal
Details
A measurement indicating the diameter-pitch per specific measurement scale of the item.Teeth Quantity
19
Details
The number of teeth included on the item.Bore Style
w/ keyway both ends
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.Hardness Rating
33.0 rockwell c minimum and 43.0 rockwell c maximum teeth
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Nominal Outside Diameter
0.878 inches
Details
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.Tooth Form
standard
Details
An indication as to whether the teeth are a standard depth or modified to a shorter depth.Pressure Angle
20.0000 degrees
Details
The measurement of the pressure angle on the item.Nominal Distance Between Body Face And Protruding Hub End
0.051 inches first end
Details
The nominal distance between the body face and the protruding hub end.Face Nominal Width
0.380 inches
Details
A measurement taken at right angles to the length of the face,in distinction from thickness.Bore Nominal Diameter
0.422 inches both ends
Details
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.Keyway Nominal Width
0.065 inches both ends
Details
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.Nominal Distance From Bore Center To Keyway Bottom
0.254 inches both ends
Details
The nominal distance from the center of the bore to the bottom of the keyway(s).Hub Style Designator
plain first end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.Hub Nominal Diameter
0.650 inches first end
Details
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.Material
steel comp e9310 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6260 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
protruding hub
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 64910 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - PHOENIX
CAGE: 99193
PHOENIX
, AZ
, 85034-2802
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3020-00-003-6298
What is the NIIN of the NSN 3020-00-003-6298?
The National Item Identification Number (NIIN) of the NSN 3020-00-003-6298 is 00-003-6298
When the NSN 3020-00-003-6298 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, May 26, 1972
Does the NSN 3020-00-003-6298 contain any precious metals?
Type/content is unknown
Does the NSN 3020-00-003-6298 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.