Wire Rope Swaging Sleeve

1-16C0PPER

(NSN) National Stock Number

4030-00-431-5536

Federal Supply Classification

4030 Fittings for Rope, Cable and Chain

Item Name Code

16283

Schedule B Code

7508900000

Summary

0.164 inches minimum and 0.176 inches maximum overall width, 0.375 inches nominal overall length, 0.243 inches minimum and 0.259 inches maximum overall height, 0.062 inches nominal accommodated material diameter, feat criticality code justification, flight safety critical special features

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	SB

Identification

A compression fitting designed to make a permanent eye, lap, or running splice on an item.

INC	FIIG	Concept	Condition
16283	A105A0	-	1

Specifications

Overall Width

0.164 inches minimum and 0.176 inches maximum

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness. please use mrc abmk in place of this discontinued mrc.

Overall Length

0.375 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Overall Height

0.243 inches minimum and 0.259 inches maximum

Details

The distance measured in a straight line from the bottom to the top of an item.

Accommodated Material Diameter

0.062 inches nominal

Details

The length of a straight line which passes through the center of the accommodated material,and terminates at the circumference.

Criticality Code Justification

feat

Details

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

Special Features

flight safety critical

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Material

copper

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Surface Treatment

zinc

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Style Designator

figure 8

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
400207	F4665	4	-	5	2	-	ZF
28-1-C	FC097	4	-	5	9	-	ZF
303238	H0G87	4	-	5	2	-	ZN
4030PL0907169	9009H	9	-	6	9	-	WP
4030PL1602924	9009H	9	-	6	9	-	WP
CP15-2-1-2P	99696	4	-	5	2	-	9Z
28-1-C	08716	5	-	5	2	-	KZ
711698-73	73293	5	-	5	9	-	SB
RS290-1	86831	A	-	3	2	-	KZ
3506X13	39428	5	-	5	9	-	SB
5-4-4783	81337	1	-	3	2	-	KZ
SC-C-595076-2	80063	1	-	3	2	-	ZZ
SMB423647	80063	4	-	C	1	-	SB
27A12-2	38597	4	-	3	2	-	SB
MS51844-22	81348	E	-	5	9	-	ZZ
291AS114	30003	1	-	7	2	-	KZ
8537648	19207	1	-	5	2	-	BD
9M182-2	76301	4	-	5	2	-	9Z
415379-1	80020	5	-	C	1	-	ZZ
BWR610-2	70958	5	-	5	9	-	SB
GS531B2P	26512	1	-	7	2	-	KE
C35-8123-2	13175	4	-	C	1	-	SB
128-2VC	76691	4	-	5	9	-	KZ
18-1C	76691	5	-	5	9	-	ZZ
28-1-6	76691	5	-	5	9	-	SB
28-1C	76691	5	-	5	2	-	ZG
38-1C	76691	5	-	5	9	-	SB
48-1C	76691	5	-	5	9	-	SB
6000163-3	29381	5	-	5	9	-	SB
38-1C	20836	5	-	5	9	-	SB