Rod End Clevis
4382935-12
(NSN) National Stock Number
5340-00-022-3027
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
03796
Schedule B Code
-
Summary
0.625 inches nominal shank length, 0.187 inches minimum and 0.189 inches maximum hole diameter, 0.427 inches minimum and 0.430 inches maximum shank diameter, 0.312 inches nominal overall width, 0.250 inches nominal end radius, 0.141 inches nominal fork span width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also yoke, universal joint and connector, rod end. For items specifically designed for aviation, see clevis, rod end, aviation.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03796 | A264A0 | - | 2 |
Specifications
Shank Length
0.625 inches nominal
Details
A measurement of the longest dimension of the shank,in distinction from width.Hole Diameter
0.187 inches minimum and 0.189 inches maximum
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Shank Diameter
0.427 inches minimum and 0.430 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Overall Width
0.312 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.End Radius
0.250 inches nominal
Details
A measurement of a straight line extending from the center of a circle to the end.Fork Span Width
0.141 inches nominal
Details
The distance laterally from tip to tip of the fork.Distance From Pivot Pinhole Center To Rod Connection End
1.875 inches nominal
Details
None.Fork Arm Thickness
0.085 inches nominal
Details
None.Fork Depth
0.990 inches minimum and 1.010 inches maximum
Details
The measurement between specified points of the fork,in distinction from height.Shank Shoulder Diameter
0.500 inches nominal
Details
The length of a straight line which passes through the center of the shank shoulder,and terminates at the circumference.Material
steel comp 1035 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
fed std 66 fed std single material response overall or aisi/sae assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
clevis
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49240 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5340-00-022-3027
What is the NIIN of the NSN 5340-00-022-3027?
The National Item Identification Number (NIIN) of the NSN 5340-00-022-3027 is 00-022-3027
When the NSN 5340-00-022-3027 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Fri, May 17, 1968
Does the NSN 5340-00-022-3027 contain any precious metals?
Type/content is unknown
Does the NSN 5340-00-022-3027 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.